2.0L TFSI EA113 RSX Injector Kit matched BAR-TEK BAR-TEK Motorsport 21tf055 - сервиз

4 injectors especially for the 2.0L TFSI engine for power over 500 PS (368 kW). Approx. 40 % higher flow rate than original S3 nozzles. With 130 bar rail pressure up to 600 PS (441 kW) possible. At higher pressure accordingly more. (For comparison with the S3 nozzles at 380 PS end) Optimal spray pattern. Not to compare with the RS4 nozzles which give a wrong spray pattern. Brand new. No rebuilt or subsequently eroded injectors! The kit contains 4 pieces including adapter plugs. PLUS: Nozzles are tested and paired with each other in advance! So you get perfectly matched injectors for your 2.0L TFSI! Mount injectors with combustion ring, but without the lower clamp. Upper metal bracket may need some regrinding. (picture shows S3 injectors) Even new injectors have a certain spread of the injection quantity! The manufacturers indicate a tolerance of up to 8% as \"normal\". But in the worst case this can lead to incorrect injection quantities per cylinder. As a result, the cylinders get different amounts of fuel injected and the engine does not run cleanly or damage can occur to piston or valves! Thanks to our ASNU nozzle test bench, we can also test new injection nozzles and thus pair them optimally with each other. Click here to go directly to our nozzle test bench. Info: it is \"normal\" that the position of the injectors changes and the nozzles no longer protrude into the combustion chamber.