2.5L TFSI Audi RS3 8V & TTRS 8S Forged Pistons & Steel Connecting Rods High Boost JE & BAR-TEK® BAR-TEK Motorsport 22rs306 - сервиз

This kit is made for you if you are really serious about increasing performance. Our High Boost Kit contains everything you need to make you and your engine happy: power up to 1000 hp with your 2.5L TFSI engine! Whenever you think you can\'t go any further, think of this kit. Because here we have once again outdone ourselves. The High Boost Kit is not called that for nothing! It gives you everything you need for the best performance from your 5-cylinder: a perfectly matched combination of forged pistons, connecting rods, connecting rod bolts and connecting rod bearings. Visually alone, this set can do it all: Our BAR-TEK® H-shafted steel connecting rods, the matching high-performance pistons from JE Pistons are available as Ultra Series. All other parts are also of the highest quality: conrod bearing shells and connecting rod bolts from ARP. That\'s really all you need. Not only do these components harmonise perfectly with each other, but you also save money as a set compared to buying them individually! Extreme kit for extreme performance! Of course, our kit is not only a visual eye-catcher, but is primarily designed for extreme performance. With this kit, you can achieve up to 1000 hp with your 2.5L TFSI without any worries! This is because we only pack the best components into our kit and they are optimally matched to each other. The JE Pistons- piston in this kit are custom piston manufactured especially for us according to our specifications. Specially reinforced ring zones and an extra coating make them the perfect piston for the 5-cylinder aluminium block. For extreme performance, the piston also come with the High Boost piston pins. At the same time, they are still quite light. This combination is of course perfect for motorsport. The piston comes with everything you need for installation: pins, rings and clips. Our specially steel connecting rods are also extremely light and at the same time very stable. Thanks to their surface, they can easily withstand high pressure loads. They are milled from solid material and have an additional hole for better piston pin lubrication (rifle drilled). They also come with everything you need for assembly: the matching ARP2000 expansion bolts and assembly paste. These two parts are the stars of the kit and are rounded off by racing bearings and the like. As I said, more is simply not possible! Features of the high performance piston: 9.5:1 compression ratio Extremely light due to special alloy Reinforced for maximum performance for standard bore 82.50 mm and also in 82.55 mm if minimal honing is required 21 mm piston pin For 2.5L TFSI with engine type EA855EVO Installation and bore dimensions enclosed Features of the h-beam conrods: high-strength milled from solid material suitable for extreme power increases of 1000 hp extremely light and very stable Magnaflux inspected 5 pieces per set Dimensions: 144 x 21 mm Weight per conrods with screws only approx. 600 grams With oil riser hole for piston pin lubrication (rifle drilled) precisely angled and tested in-house with ARP 2000 expansion bolts 3/8\" Features of the ACL connecting rod bearings: Racing bearings, ACL Race extra coated extra bore for the piston pin