Конектори и фитинги за метанол

Информация:

Universal boost pressure adapter (1/8" NPT27) made of brass. For Boost Cooler systems or boost gauges.

Допълнителна информация:

Universal boost pressure port - ideal for Boost Cooler setups, boost gauges, or MAP sensors. This compact boost tap allows easy access to turbocharger pressure directly from your charge pipe or intercooler piping. Simply drill and tap a suitable location, screw in the fitting, and you’re ready to route a reference signal to your water-methanol system, boost gauge, or standalone ECU. Made from high-quality CNC-machined brass, this adapter is designed for long-term durability under pressure and heat. Its compact, universal form makes it a versatile solution for a wide range of forced-induction setups. Key Features: Quick boost pressure source - ideal for custom setups Standard 1/8" NPT27 male thread - compatible with most systems High-strength CNC-machined brass - corrosion and heat resistant Compact universal design - ideal for tight engine bays Fits 3 mm (1/8") ID nylon or silicone pressure tubing Technical Details: Thread type: 1/8" NPT27 (tapered male) Material: Brass Hose fitting: For 3 mm inner diameter (ID) tubing Applications: Boost Coolers, boost/vacuum gauges, MAP sensors, standalones

1/8" Fitting for 1/4" Boost Cooler Water-Methanol Pressure Line with new Clamping Ring Connection.

High Quality 3/8"-NPT to 1/4" Screw-In Adapter for Boost Cooler Water Injection Pressure Line. The new generation of SNOW Performance Rapid Fittings with clamping ring connection replaces the push-lock connection technology of the previous versions. The advantages of the new water injection fittings are the outstanding fixation of the pressure line. - Leakages or even a shearing of the line at the connection point are excluded, even with strong vibrations, as can occur in particular in the marine or commercial vehicle segment. The SNOW Performance 3/8"-NPT fitting fits all Boost Cooler pumps with 3/8" connections as well as all Boost Cooler 3l, 9.5l and 26.5l water-methanol tanks. Subsequent installation in existing Boost Cooler water-methanol injection systems is possible at any time. Product Features: 3/8"-NPT male Fitting with 1/4" Connection, Straight Design Rapid Push-In Fittings can be easily installed, Highly Efficient and Easy to Use. The Push-In Locking Nuts can be tightened both manually and with a Spanner. The Special Shape of the Guiding Cone ensures that the Tube cannot be accidentally cut Suitable for all 1/4" Water-Methanol Injection Pressure Lines Material: Brass Nickel plated

Информация:

3/8" Fitting for 1/4" Boost Cooler Water-Methanol Pressure Line with new Clamping Ring Connection.

Допълнителна информация:

High Quality 3/8"-NPT to 1/4" Screw-In Adapter for Boost Cooler Water Injection Pressure Line. The new generation of SNOW Performance Rapid Fittings with clamping ring connection replaces the push-lock connection technology of the previous versions. The advantages of the new water injection fittings are the outstanding fixation of the pressure line. - Leakages or even a shearing of the line at the connection point are excluded, even with strong vibrations, as can occur in particular in the marine or commercial vehicle segment. The SNOW Performance 3/8"-NPT fitting fits all Boost Cooler pumps with 3/8" connections as well as all Boost Cooler 3l, 9.5l and 26.5l water-methanol tanks. Subsequent installation in existing Boost Cooler water-methanol injection systems is possible at any time. Product Features: 3/8"-NPT male Fitting with 1/4" Connection, Straight Design Rapid Push-In Fittings can be easily installed, Highly Efficient and Easy to Use. The Push-In Locking Nuts can be tightened both manually and with a Spanner. The Special Shape of the Guiding Cone ensures that the Tube cannot be accidentally cut Suitable for all 1/4" Water-Methanol Injection Pressure Lines Material: Brass Nickel plated

Информация:

This is a metal bulkhead fitting that allows a safe pass through on a firewall or in a reservoir (like a factory washer fluid tank) with quick connects on both sides.

Допълнителна информация:

deal for laying the Water Meth injection pressure line through the vehicle, as well as tank connection in any container used. The threaded body can be tightened down with nuts on both sides, or in plastic tanks can be threaded in with methanol resistant (GOOP brand recommended) sealant for a leak-free installation. Our fittings have been designed with a special collet which provides an homogeneous tight on the whole surface of the Boost Cooler Water Methanol pressure line, thus ensuring high reliability and a long service life, also after connections and disconnections of the tube are repeated several times. Product Features: Push-Lock Fitting, 1/4" - 1/4" Suitable for 1/4" Water Injection Pressure Line Outer Nut: M14 Material: nickel plated brass Material Sealings: EPDM, Methanol resistant

Информация:

Adapter from 1/8 "-NPT thread to Dash 4 (4AN) for Boost Cooler ProLine Stainless Steel Braided Hose.

Допълнителна информация:

High quality 1/8 "aluminum screw-in adapter - ProLine series The Dash 4 screw-in adapter of the SNOW Performance ProLine series can be used for all Boost Cooler solenoid valves, direct port upgrades, low-profile nozzle holders, etc. Suitable for Boost Cooler ProLine steel braided pressure line. Product Features: Adapter from 1/8 "-NPT thread to Dash 4 (4AN) Suitable for Boost Cooler ProLine steel braided lines Also enables subsequent upgrade of existing systems to ProLine Material: High performance lightweight 6061-T6 CNC machined aluminum Surface treatment: Black anodized finish for durability and strength 100% Methanol Resistant

Информация:

Adapter from 1/8 "-NPT thread to Dash 4 (4AN) for Boost Cooler ProLine Stainless Steel Braided Hose.

Допълнителна информация:

High quality 1/8 "aluminum screw-in adapter - ProLine series The Dash 4 screw-in adapter of the SNOW Performance ProLine series can be used for all Boost Cooler solenoid valves, direct port upgrades, low-profile nozzle holders, etc. Suitable for Boost Cooler ProLine steel braided pressure line. Product Features: Adapter from 1/8 "-NPT thread to Dash 4 (4AN) Suitable for Boost Cooler ProLine steel braided lines Also enables subsequent upgrade of existing systems to ProLine Material: High performance lightweight 6061-T6 CNC machined aluminum Surface treatment: Black anodized finish for durability and strength 100% Methanol Resistant

Информация:

Adapter from 3/8 "-NPT thread to Dash 4 (4AN) for Boost Cooler ProLine Stainless Steel Braided Hose.

Допълнителна информация:

High Quality 3/8"Aluminum screw-in adapter, straight Verion- ProLine series The Dash 4 screw-in adapter of the SNOW Performance ProLine series can be used for all Boost Cooler pumps with 3/8" connections and most of our tanks. Product Features: Fitting from 3/8 "-NPT thread to Dash 4 (4AN), straight Suitable for Boost Cooler ProLine steel braided lines Also enables subsequent upgrade of existing systems to ProLine Material: High performance lightweight 6061-T6 CNC machined aluminum Surface treatment: Black anodized finish for durability and strength 100% Methanol Resistant

Информация:

Adapter from 3/8 "-NPT thread to Dash 4 (4AN) for Boost Cooler ProLine Stainless Steel Braided Hose.

Допълнителна информация:

High quality 3/8 "aluminum screw-in adapter - ProLine series The Dash 4 screw-in adapter of the SNOW Performance ProLine series can be used for all Boost Cooler pumps with 3/8" connections and most of our tanks. Product Features: Adapter from 3/8 "-NPT thread to Dash 4 (4AN) Suitable for Boost Cooler ProLine steel braided lines Also enables subsequent upgrade of existing systems to ProLine Material: High performance lightweight 6061-T6 CNC machined aluminum Surface treatment: Black anodized finish for durability and strength 100% Methanol Resistant

Информация:

Highly Efficient and easty to use 1/4" T-connector with EPDM seals.

Допълнителна информация:

With appropriate 1/4 "connections for the Boost Cooler Water-Methanol pressure line. The T-connector can be used in a variety of ways, e.g. for the use of further water injection nozzles or parallel use of 2 water-methanol fluid reservoirs etc. Product Features: Rapid push-in fittings can be easily installed, Highly Efficient and Easy to Use. The push-in locking nuts can be tightened both manually and with a spanner. The special shape of the guiding cone ensures that the tube cannot be accidentally cut Suitable for all 1/4 "Water Injection pressure lines Material: Brass nickel plated

Информация:

1/8 " Compression Fitting for Stage 3 TD Exhaust Gas Temperature Sensor

Допълнителна информация:

Compression Fitting for Stage 3 TD Exhaust Gas Temperature Sensor. Replacement compression fitting for the exhaust temperature sensor of the Boost Cooler Stage 3 TD system and compatible EGT sensors. Product features: Material: Stainless Steel 316 Extremely temperature resistant Thread: 1/8 "NPT27

Информация:

T-Fitting Dash 4 (4AN) for Boost Cooler ProLine Stainless Steel Braided Hose.

Допълнителна информация:

High quality aluminum Dash 4 T-Fitting - ProLine series The Dash 4 T-connector of the SNOW Performance ProLine series can be used in a variety of ways, e.g. for the use of further water injection nozzles or the parallel use of 2 water-methanol reservoirs. Product Features: T-Fitting with Dash 4 (4AN) connection Suitable for Boost Cooler ProLine steel braided lines Also enables subsequent upgrade of existing systems to ProLine Material: High performance lightweight 6061-T6 CNC machined aluminum Surface treatment: Black anodized finish for durability and strength 100% Methanol Resistant

Информация:

Dash 4 steel braided line connection UNF thread and 360 ° rotation compensation. Manufacture the steel braided line yourself.

Допълнителна информация:

Reusable Dash 4 connection made of aluminum with UNF thread and 360 ° rotating compensation. - ProLine series. With the Dash 4 aluminum fitting, it is possible to manufacture steel braided lines yourself according to individual needs and to install them free of tension. No additional seals are required. The technical design of the fitting is optimized for maximum flow and reduces turbulence and pressure losses in your Boost Cooler Water-Methanol Injection System. Product Features: Dash 4 Fitting, reusable, with 7 / 16-20UNF Thread Suitable for Boost Cooler ProLine Steel Braided Line Allows a subsequent Upgrade of existing Boost Cooler Systems to ProLine Material: aluminum 6061-T6, hard anodized CNC machined for minimal tolerances and trouble-free operation Black anodized finish for durability and strength 100% methanol-resistant Assembly Instructions Wrap the steel flex cable at the interface with adhesive tape and cut to size with a fine saw. Unscrew the press nut from the fitting and push it onto the hose. Push the sealing olive onto the PTFE core up to the inner collar. The steel flex jacket must now be over the sealing olive. Screw the fitting into the PTFE tube as far as it will go and screw the press nut to the fitting by hand. Clamp the press nut in a vice and tighten it Perform a pressure test.

Информация:

The water injection Hyper-Sonic nozzle is screwed into the holder and connected to our 1/4" pressure line.

Допълнителна информация:

Low profile design for easy installation of your SNOW Performance Water-Methanol nozzle. Water Injection Nozzle holder for the Boost Cooler Hyper-Sonic nozzles. The new 90°nozzle holder comes in a sleek low profile design. Securely connect the pressure line directly to your SNOW Performance water methanol nozzle. The water injection Hyper-Sonic nozzle is screwed into the holder and connected to our 1/4" pressure line. Product Features: 1x Nozzle Holder 90° low profile 2x 1/8" NPT Ports for Boost Cooler Nozzle and Fitting Material: High performance lightweight 6061-T6 CNC machined aluminum Surface treatment: Black anodized finish for durability and strength 1x 1/4" Compression Fitting for 1/4"-Pressure Line 100% Methanol Resistant

Информация:

The water injection Hyper-Sonic nozzle is screwed into the holder and connected to our 1/4" pressure line.

Допълнителна информация:

Low profile design for easy installation, straight version. Water Injection Nozzle holder for the Boost Cooler Hyper-Sonic nozzles. The new straight nozzle holder from SNOW Performance comes in a sleek low profile design. Securely connect the pressure line directly to your water methanol nozzle. The Boost Cooler water injection Hyper-Sonic nozzle is screwed into the nozzle holder and connected to our 1/4" pressure line. Product Features: 1x Nozzle Holder, low profile, straight version 2x 1/8" NPT Ports for Boost Cooler Nozzle and Fitting Material: High performance lightweight 6061-T6 CNC machined aluminum Surface treatment: Black anodized finish for durability and strength 1x 1/4" Compression Fitting for 1/4"-Pressure Line 100% Methanol Resistant

Информация:

The water injection Hyper-Sonic nozzle is screwed into the holder and connected to our ProLine steel braided lines.

Допълнителна информация:

Flat design for space-saving installation with Dash 4 / AN4 fitting, suitable for the ProLine series. Water Injection Nozzle holder for the Boost Cooler Hyper-Sonic nozzles. The new 90°-nozzle holder comes in a sleek low profile design. Securely connect the steel braided line directly to your water methanol nozzle. The water injection Hyper-Sonic nozzle is screwed into the holder and connected to our ProLine strainless steel braided line. The ProLine Nozzle Holder can also be retrofitted into existing Boost Cooler Water Methanol Injection Systems with 1/4" Nylon / FEP lines. Product Features: 1x Nozzle Holder 90° low profile, aluminium, hard anodized 2x 1/8" NPT Ports for Boost Cooler Nozzle and fitting 1x 1/8"-Dash 4 fitting, aluminium, hard anodized Material: High performance lightweight 6061-T6 CNC machined aluminum Surface treatment: Black anodized finish for durability and strength 100% Methanol Resistant

Информация:

The water injection Hyper-Sonic nozzle is screwed into the holder and connected to our ProLine steel braided lines.

Допълнителна информация:

Flat design for space-saving installation with Dash 4 connection, suitable for the ProLine series. Water Injection Nozzle holder for the Boost Cooler Hyper-Sonic nozzles. The new straight nozzle holder comes in a sleek low profile design. Securely connect the steel braided line directly to your water methanol nozzle. The water injection Hyper-Sonic nozzle is screwed into the holder and connected to our ProLine strainless steel braided line. The ProLine Nozzle Holder can also be retrofitted into existing Boost Cooler Water Methanol Injection Systems with 1/4" Nylon / FEP lines. Product Features: 1x Nozzle Holder, straight design, low profile, aluminium, hard anodized 2x 1/8" NPT Ports for Boost Cooler Nozzle and fitting 1x 1/8"-Dash 4 fitting, aluminium, hard anodized Material: High performance lightweight 6061-T6 CNC machined aluminum Surface treatment: Black anodized finish for durability and strength 100% Methanol Resistant

Информация:

SNOW Performance universal tank connection with clamping ring connection for our 1/4" Boost Cooler pressure line.

Допълнителна Информация:

High-quality aluminium universal tank connector for Boost Cooler 1/4" pressure tubing. The SNOW Performance self-sealing tank connector is very easy to install on the outside of the (wiper water) tank. Drill a 7/8"(22mm) hole in a flat part of the tank, push the tank connector into the tank from the outside and then tighten it by hand. The SNOW Performance Universal Tank Connector is made of aluminium with T304 stainless steel wire mesh for the filter. The cone-shaped screen prevents residue build-up and stays clog-free for the long term. Product Features/Scope of Delivery: 1x Water-Methanol Universal Tank Connector inkl. Filter (T304 stainless steel) Material: High performance lightweight 6061-T6 CNC machined aluminum 1/8"-NPT male Fitting with 1/4" Connection, Straight Design Suitable for Boost Cooler 1/4" pressure tubing. Surface treatment: Black anodized finish for durability and strength 100% Methanol Resistant

Информация:

Universal tank connection with 1/8"-NPT to Dash 4 (4AN) fitting for Boost Cooler ProLine steel flex pressure line

Допълнителна информация:

High-quality aluminium universal tank connector for Boost Cooler ProLine series. The SNOW Performance self-sealing tank connector is very easy to install on the outside of the (wiper water) tank. Drill a 7/8"(22mm) hole in a flat part of the tank, push the tank connector into the tank from the outside and then tighten it by hand. The SNOW Performance Universal Tank Connector is made of aluminium with T304 stainless steel wire mesh for the filter. The cone-shaped screen prevents residue build-up and stays clog-free for the long term. Product Features/Scope of Delivery: 1x Water-Methanol Universal Tank Connector inkl. Filter (T304 stainless steel) 1x Fitting 1/8 "-NPT thread to Dash 4 (4AN) Material: High performance lightweight 6061-T6 CNC machined aluminum Suitable for Boost Cooler ProLine steel braided lines Surface treatment: Black anodized finish for durability and strength 100% Methanol Resistant

Информация:

The DNU allows an additional Boost Cooler Nozzle to be mounted in any of our Water Methanol Injection kits.

Допълнителна информация:

Install an additional nozzle in your Boost Cooler Water Methanol Injection system. The SNOW Performance Dual Nozzle Upgrade enables another Boost Cooler injector to be used in parallel. For example, with a V-engine, 1 nozzle can be installed per pressure pipe. The upgrade also enables a sufficient injection quantity for engines with very high fluid requirements (trucks, CHP units, turbines). Recommended for: Bi-Turbo engines (e.g. Audi S4/RS4, Porsche) Engines with 2 separate throttle valves (e.g. V8) Powerful engines (> 500 hp), where one nozzle alone is not sufficient. 2-nozzle installation for combined charge air and combustion chamber cooling (one Boost Cooler nozzle directly downstream of IC-output, another one right in front of the throttle valve resp. intake manifold). Scope of Delivery: Nozzle Holder, 90° low profile with 1/4" Rapid push-on fitting T-Connector with EPDM-sealings and 1/4" Rapid push-on fittings High pressure 1/4" water injection hose (Nylon)

Информация:

The DNU ProLine allows an additional Boost Cooler Nozzle to be mounted in any of our Water Methanol Injection kits.

Допълнителна информация:

Install an additional nozzle in your Boost Cooler Water Methanol Injection ProLine system. The SNOW Performance Dual Nozzle ProLine Upgrade enables another Boost Cooler injector to be used in parallel. For example, with a V-engine, 1 nozzle can be installed per pressure pipe. The upgrade also enables a sufficient water methnaol injection quantity for engines with very high fluid requirements (trucks, CHP units, turbines). The ProLine Dual nozzle upgrade can also be retrofitted into existing Boost Cooler water methanol injection systems with 1/4" Nylon / FEP lines. Recommended for: Bi-Turbo engines (e.g. Audi S4/RS4, Porsche) Engines with 2 separate throttle valves (e.g. V8) Powerful engines (> 500 hp), where one nozzle alone is not sufficient. 2-nozzle installation for combined charge air and combustion chamber cooling (one Boost Cooler nozzle directly downstream of IC-output, another one right in front of the throttle valve resp. intake manifold). Scope of Delivery: 1x Nozzle Holder 90° low profile, aluminium, hard anodized 1x 1/8"-Dash 4 fitting, aluminium, hard anodized 1x T-Fitting, aluminium with Dash 4 male fittings Material: High performance lightweight 6061-T6 CNC machined aluminum Surface treatment: Black anodized finish for durability and strength 2x 30cm stainless steel braided line with Dash 4 female fittings

Информация:

The DNU ProLine allows an additional Boost Cooler Nozzle to be mounted in any of our Water Methanol Injection kits.

Допълнителна информация:

Maximum cooling performance and optimized distribution with four precision injection points The Snow Performance Quad Nozzle Upgrade is the perfect expansion for Boost Cooler water-methanol injection systems where maximum intake air cooling, equal distribution, and high-output performance are required. Designed for builds with limited space or where a traditional intercooler setup is not used. Four precisely placed nozzles ensure consistent atomization – ideal for high-horsepower engines, motorsport applications, and demanding setups. This upgrade includes four stainless steel braided lines and CNC-machined aluminum fittings and is fully compatible with all existing ProLine systems. Designed to connect with Boost Cooler Hypersonic nozzles (sold separately). Highly recommended in combination with: Boost Cooler V-Band Injection Ring (Part No. SP30130) Boost Cooler Injection Ring with 1/8" Fitting (Part No. SP30114) Boost Cooler Silicone Adapter with 4 Nozzle Ports (Part No. SP31141) Ideal for high-boost or high-power applications Effectively lowers intake air temperatures Precise multi-point injection for optimized atomization Compatible with all Boost Cooler ProLine systems Recommended for: Engines with high cooling requirements Applications requiring optimized liquid distribution Vehicles without an intercooler or with tight intake routing Motorsport builds with focus on octane boost and knock control Kit contents: 4x stainless steel braided lines with Dash 4 fittings 4x straight nozzle holders, black anodized aluminum 3x T-fittings, anodized aluminum, Dash 4 Full set of Dash 4 fittings and connectors Material: CNC-machined 6061-T6 aluminum Black anodized finish – robust, pressure- and heat-resistant