Ковани Биели Audi 2.2 2.3 2.5 20V

5-cylinder X-Beam connecting rod for up to 1000 hp power output

With our BAR-TEK® X-Beam connecting rods for Audi 5-cylinder engines, you are ideally equipped for extreme performance increases: the 144 x 20 mm steel connecting rods can withstand up to 1000 HP, and the series connecting rods can no longer keep up.

Our conrods are milled from the solid and with a weight of only 599 grams per conrod (including bolts) they are also very light. At the same time they are extremely stable due to their X-Beam. This is designed to distribute and reduce stress loads. The large cross-section of X-Beam rods ensures that they are crack-resistant and have high rigidity. These are the perfect characteristics of a connecting rod for ambitious drivers!

The connecting rods for your Audi 5-cylinder come with an additional boring (rifle drilled), which provides much better piston pin lubrication. All connecting rods are precisely angled and tested by us. Included are ARP 2000 3/8\" expansion bolts and the corresponding ARP assembly lubricant.

Our special X-Beam steel connecting rods are perfect for all Audi 5-cylinder engines such as the S2, RS2 and all 2.3L 20V 7A engines with 144 x 20 mm connecting rods.

Features of our x-beam connecting rods:

• Original BAR-TEK® connecting rod with X-Beam
• milled from the solid and thus high-strength
• suitable for extreme performance increases up to approx. 1000 HP
• extremely light and very stable
• Magnaflux inspected
• 5 pieces per set
• Dimensions: 144 x 20 mm
• Weight per connecting rod with screws only 599 grams
• precisely angled and tested at our premises
• With ARP 2000 3/8\" expansion bolts
• ARP assembly paste
• With additional drilling for piston pin lubrication (Rifle drilled)

Tighten your connecting rods correctly

The connecting rods come with screws and assembly paste, so you have everything you need for assembly. However, there are a few important things to keep in mind. On this page we have summarized for you how to mount and tighten connecting rod screws correctly.

The bearings are not included in the scope of delivery.

More information on how to properly tighten the connecting rod bolts

Manufacturer

Information about the manufacturer

BAR-TEK®

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3, 51491 Overath-Brombach, Germany

[email protected]

Product detailed specification Manufacturer: FCP EngineeringModel: FCPRHA14450620-5Profile: H-beamC to C: 144mmBig end diameter: 50.6mmPin diameter: 20mmQuantity: 5 pcs., 10 pcs. ARP2000 3/8" boltsMade of: forged steel 4340 EN24erAdvertised horsepower rating: 700HP (5 cylinder)Advertised RPM rating: 9000RPMAudi 90, Coupe - 2.3 20V (7A)200, S2, RS2, S4, S6 - 2.2 20V Turbo (3B, ABY, ADU, AAN)  

Product detailed specification Manufacturer: FCP EngineeringModel: FCPRHA15550620-5Profile: H-beamC to C: 155mmBig end diameter: 50.6mmPin diameter: 20mmQuantity: 5 pcs., 10 pcs. ARP2000 3/8" boltsMade of: forged steel 4340 EN24erAdvertised horsepower rating: 800HP (5 cylinder)Advertised RPM rating: 9000RPM Audi Quattro, 200, S2, RS2, S4, S6 - 2.5 2.6 20V Stroker Engine setup: 2.5tdi 236mm block with 95.5 crankshaft and standard 2.2 20V Pistons

Product detailed specification Manufacturer: FCP EngineeringModel: FCPRHA15950622-5Profile: H-beamC to C: 159mmBig end diameter: 50.6mmPin diameter: 22mmQuantity: 5 pcs., 10 pcs. ARP2000 3/8" boltsMade of: forged steel 4340 EN24erAdvertised horsepower rating: 800HP (5 cylinder)Advertised RPM rating: 9000RPM Audi Quattro, 200, S2, RS2, S4, S6 - 2.5 2.6 20V Stroker Engine setup: 2.5 TDi 236mm block with 95.5 crankshaft and 2.2T 20V stroker pistons

Product detailed specification Manufacturer: FCP EngineeringModel: FCPRHA1444920-5Profile: H-beamC to C: 144mmBig end diameter: 49.00mmPin diameter: 20mmQuantity: 5 pcs., 10 pcs. ARP2000 3/8" boltsMade of: forged steel 4340 EN24erAdvertised horsepower rating: 700HP (5 cylinder)Advertised RPM rating: 9000RPMAudi 90, Coupe - 2.3 20V (7A)200, S2, RS2, S4, S6 - 2.2 20V Turbo (3B, ABY, ADU, AAN) 

Product detailed specification Manufacturer: FCP EngineeringModel: FCPRHA16450622-5Profile: H-beamC to C: 164mmBig end diameter: 50.6mmPin diameter: 22mmQuantity: 5 pcs., 10 pcs. ARP2000 3/8" boltsMade of: forged steel 4340 EN24erAdvertised horsepower rating: 800HP (5 cylinder)Advertised RPM rating: 9000RPM Audi Quattro, 200, S2, RS2, S4, S6 - 2.2 20V Engine setup: 2.5tdi 236mm block with 86.4 (OEM) crankshaft and 2.2 20V stroker pistons

Product detailed specification Manufacturer: FCP EngineeringModel: FCPRHA14350622-5Profile: H-beamC to C: 143.25mmBig end diameter: 50.6mmPin diameter: 22mmQuantity: 5 pcs., 10 pcs. ARP2000 3/8" boltsMade of: forged steel 4340 EN24erAdvertised horsepower rating: 800HP (5 cylinder)Advertised RPM rating: 9000RPM Audi Quattro, 200, S2, RS2, S4, S6 - 2.5 2.6 20V Stroker Engine setup: OEM 220mm block with 2.5 TDi 95.5 crankshaft and 2.2 20V FCP stroker pistons

Spezial Conrods by K1 for all Audi 5 cylinder S2, RS2 and 2.3L 20V 7A engines with 144x20mm conrods.

Very light and for extreme performance.
Including 5 pieces with ARP rod bolts.

The K1 conrods will fit for all 5 cylinder Audi S2, RS2 and 2.3L 20V 7A engines with 144x20mm conrods.

(Example picture, it will be delivered 5 pcs.)

Manufacturer

Information about the manufacturer

K1

K1 Technologies

7201 Industrial Park Blvd. Mentor, OH 44060, United States

[email protected]

EU responsible person

Race Winning Brands Europe B.V.

Pesetaweg 27 2153PJ Nieuw-Vennep, The Netherlands

[email protected]