Разпределителни валове BMW

 

Camshaft for all BMW 320i/325i 6 Cylinder M20 284°/272° asymetric.
BMW 2,0l - 2,5l Engines M20 only.

Also for Coupe und Cabrio.

More torque and HP for your engine.

Power increase 16hp.

Gradzahl = 284°/272°
Spreizung = 110°
Ventilhub = 11,4/11,2mm
Hub in OT = 2,2/1,7mm
Profil asymetrisch

Putting a Sports-Cam in your engine new Lifters must be used to prevent premature cam lobe wear, otherwise the product warranty will be void!

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

Camshaft Schrick for BMW M20 6 Cyl. 2 Valve 2.0-2.5 l

More torque and Horsepower!

304°, cam lift 7,7 (12,2), valve lift at TDC 4,0, valve clearance 0,25/0,25

(Pic shows different cams)

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

Camshaft Schrick for BMW M20 6 Cyl. 2 Valve 2.0-2.5 l

More torque and Horsepower!

288°, cam lift 7,3 (11,4), valve lift at TDC 2,8, valve clearance 0,25/0,25

(Pic shows different cams)

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

Camshaft Schrick for BMW M10 (-09/88)

More torque and Horsepower!

304°, cam lift 8,2 (10,7), valve lift at TDC 2,9, valve clearance 0,25/0,25

Clockwise distributor. A small slot must be bored in the middle bearing!

(Pic shows different cams)

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

Camshaft Schrick for BMW M10 (-09/80)

More torque and Horsepower!

292°, cam lift 7,6 (10,0), valve lift at TDC 2,6, valve clearance 0,20/0,20

Clockwise distributor.

(Pic shows different cams)

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

Camshaft Schrick for BMW M10 (-09/80)

More torque and Horsepower!

284°, cam lift 7,2 (9,5), valve lift at TDC 2,0, valve clearance 0,20/0,20

clockwise distributor.

(Pic shows different cams)

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

Camshaft Schrick for BMW M10 (09/80-)

More torque and Horsepower!

304°, cam lift 8,2 (10,7), valve lift at TDC 2,9, valve clearance 0,25/0,25

Anti-clockwise distributor. A small slot must be bored in the middle bearing!

(Pic shows different cams)

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

Camshaft Schrick for BMW M10 (09/80-)

More torque and Horsepower!

292°, cam lift 7,6 (10,0), valve lift at TDC 2,6, valve clearance 0,20/0,20

Ant-clockwise distributor.

(Pic shows different cams)

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

Camshaft Schrick for BMW M20 6 Cyl. 2 Valve 2.0-2.5 l

More torque and Horsepower!

272°, cam lift 7,0 (11,0), valve lift at TDC 1,6, valve clearance 0,25/0,25

(Pic shows different cams)

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

Camshaft Schrick for BMW M20 6 Cyl. 2 Valve 2.8-3.5 l

More torque and Horsepower!

282°, cam lift 8,4 (10,6), valve lift at TDC 1,8, valve clearance 0,25/0,25

Distributor drive, not for Motronic, whithout fuel pump drive!

(Pic shows different cams)

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

Camshaft Schrick for BMW M20 6 Cyl. 2 Valve 2.8-3.5 l (09/83-)

More torque and Horsepower!

284°, cam lift 8,7/8,6 (10,9/10,8), valve lift at TDC 1,9/1,7, valve clearance 0,25/0,25

Motronic 2 (09/83-), whithout fuel pump drive!

(Pic shows different cams)

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

BMW S14  4 cyl. 4 vent.

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

Camshaft Schrick for BMW M 10 4 Cyl. 2 valve

More torque and Horsepower!

316°, cam lift 9,1 (11,9), valve lift at TDC 5,6, valve clearance 0,25/0,25

First and second bearing 2mm larger in dia, clockwise distributor.

Camshaft must be used with special valve springs, valve spring retainer and valve cotters!

(Pic shows different cams)

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

Camshaft Schrick for BMW M 10 4 Cyl. 2 valve (-09/1980)

More torque and Horsepower!

336°/328°, cam lift 9,5/9,2 (12,4/12), valve lift at TDC 5,9, valve clearance 0,25/0,25

First and second bearing 2mm larger in dia, head needs remachining. clockwise distributor.

Camshaft must be used with special valve springs, valve spring retainer and valve cotters!

(Pic shows different cams)

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

Camshaft Schrick for BMW M 10 4 Cyl. 2 valve (-09/1980)

More torque and Horsepower!

328°/316°, cam lift 9,2/8,5 (12/11,15), valve lift at TDC 5,5, valve clearance 0,25/0,25

First and second bearing 2mm larger in dia, clockwise distributor.

Camshaft must be used with special valve springs, valve spring retainer and valve cotters!

(Pic shows different cams)

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

Camshaft Schrick for BMW M 10 4 Cyl. 2 valve

More torque and Horsepower!

316°, cam lift 9,1 (11,9), valve lift at TDC 5,6, valve clearance 0,25/0,25

First and second bearing 2mm larger in dia, anti-clockwise distributor (09/1980-)

Camshaft must be used with special valve springs, valve spring retainer and valve cotters!

(Pic shows different cams)

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

\"Camshaft Schrick for BMW S38, M1, M5 635Csi (1989-)

More torque and Horsepower!

280°, cam lift 11,0, valve lift at TDC 2,7, valve clearance 0,35/0,35

(Pic shows different cams)
\"

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

\"Camshaft Schrick for BMW M88, M1, M5 635Csi (-1988)

More torque and Horsepower!

272°, cam lift 11,0, valve lift at TDC 2,5, valve clearance 0,35/0,35

(Pic shows different cams)
\"

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

2 x Camshafts Schrick for BMW M42 E30 E36 256° / 256°

More torque and Horsepower!

Intake 256°, cam lift 10,4, valve lift at TDC 1,2, valve clearance hydr
Exhaust 256°, cam lift 10,4, valve lift at TDC 1,2, valve clearance hydr

Camshafts must be used with special valve springs, valve spring retainer, valve, valve cotters and tappets!

(Pic shows different cams)

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

\"2 Camshaft Schrick for BMW S14, M3 E30

More torque and Horsepower!

276°, cam lift 11,3, valve lift at TDC 3,2, valve clearance 0,35/0,40

(Pic shows different cams)
\"

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

\"2 Camshaft Schrick for BMW S14, M3 E30

More torque and Horsepower!

284°, cam lift 11,3, valve lift at TDC 3,5, valve clearance 0,25/0,30

(Pic shows different cams)
\"

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

\"2 Camshaft Schrick for BMW S14, M3 E30

More torque and Horsepower!

292°, cam lift 12,0, valve lift at TDC 4,55, valve clearance 0,25/0,30

(Pic shows different cams)
\"

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

\"2 Camshaft Schrick for BMW S14, M3 E30

More torque and Horsepower!

320°, cam lift 13,0, valve lift at TDC 6,4, valve clearance 0,20/0,25

Camshafts must be used with special valve springs, valve spring retainer, valve, valve cotters and tappets!


(Pic shows different cams)
\"

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

\"2 Camshaft Schrick for BMW S14, M3 E30

More torque and Horsepower!

308°, cam lift 12,2, valve lift at TDC 5,5, valve clearance 0,20/0,25

Camshafts must be used with special valve springs, valve spring retainer, valve, valve cotters and tappets!


(Pic shows different cams)
\"

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

Camshaft set for all BMW 330i, 530i, X5 3.0L, Z4 in 264° degrees.

One intake and one exhaust shaft made of solid steel.
Schrick recommends the reinforced valve springs and hydro pushrods for this purpose.

Sport camshafts open the valves wider and longer. Exhaust and intake valves are open simultaneously for a longer period of time. At high engine speeds, this improves the filling of the cylinders.
More torque and power!

It is essential to note that Schrick only grants warranty if new hydro tappets are also used during installation!



(Registration required)

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

\"Camshaft Kit for all BMW 320i-328i und 520i-528i in 248° for double Vanos.

One Inlet and one Outlet cam made out of billet steel!
Schrick recommends reinforced valve springs and Lifters.

More torque and HP for your engine.

Putting a Sports-Cam in your engine new Lifters must be used to prevent premature cam lobe wear, otherwise the product warranty will be void!


\"

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

Camshaft Kit for all BMW 330i, 530i, X5 3.0L, Z4 in 272°

One intake and one outlet camshaft made of solid steel.
Schrick recommends the reinforced valve springs and hydro tappets in addition.

Sport camshafts open the valves wider and longer. Exhaust and intake valves are open simultaneously for a longer period of time.
At high engine speeds, this improves the filling of the cylinders.

More torque and power!

It is essential to note that Schrick only grants warranty if new hydro tappets are also used during installation!

\"Camshaft Kit for all BMW 320i-328i und 520i-528i in 252° for single vanos.

One Inlet and one Outlet cam made out of billet steel!
Schrick recommends reinforced valve springs and Lifters.

More torque and HP for your engine.

Putting a Sports-Cam in your engine new Lifters must be used to prevent premature cam lobe wear, otherwise the product warranty will be void!


\"

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

2 x Camshafts Schrick for BMW S50, S52 M3 E36 6 Cyl. 4 valve

More torque and Horsepower!

Intake 296°, cam lift 12,4, valve lift at TDC 1,35-8,86 valve clearance 0,25
Exhaust 296°, cam lift 12,4, valve lift at TDC 3,2-7,94 valve clearance 0,25

Vanos system must be removed!

Base circle diam. 32mm!

Camshafts must be used with special valve springs, valve spring retainer, valve, valve cotters and tappets!

(Pic shows different cams)



\"

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

2 x Camshafts Schrick for BMW S50, S52 M3 E36 6 Cyl. 4 valve

More torque and Horsepower!

Intake 284°, cam lift 11,9, valve lift at TDC 0,8-7,95 valve clearance 0,25
Exhaust 284°, cam lift 11,9, valve lift at TDC 2,32-7,15 valve clearance 0,25

Vanos system must be removed!

Base circle diam. 32mm!

Camshafts must be used with special valve springs, valve spring retainer, valve, valve cotters and tappets!

(Pic shows different cams)



\"

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

 

\"2 x Camshafts Schrick for BMW S50, S52 M3 E36 6 Cyl. 4 valve

More torque and Horsepower!

Intake 296°, cam lift 12,4, valve lift at TDC 2,15-7,5, valve clearance 0,25
Exhaust 296°, cam lift 12,4, valve lift at TDC 4,00, valve clearance 0,25

M3 single Vanos 3,0L

(Pic shows different cams)


\"

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

\"2 x Camshafts Schrick for BMW S50, S52 M3 E36 6 Cyl. 4 valve

More torque and Horsepower!

Intake 284°, cam lift 11,9, valve lift at TDC 1,3-6,7, valve clearance 0,25
Exhaust 284°, cam lift 11,9, valve lift at TDC 3,1, valve clearance 0,25

(Pic shows different cams)


\"

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

Camshaft set for all BMW M3 E36 engines with S50/S52 engine single or double vanos.

Power increase 18-19 HP

With these camshafts you have significant extra power in the mid and upper rpm range. Perfect street and motorsport camshafts for the M3.
The camshaft is absolutely suitable for everyday use.

AU values remain in the target range!

Please specify after purchase whether 3.0l or 3.2l

Schrick recommends the reinforced valve springs and hydraulic tappets.

Sport camshafts open the valves further and longer. Exhaust and intake valves are open at the same time for a longer period. At high engine speeds, this improves the filling of the cylinders.
More torque and power!

It is essential to note that Schrick only grants warranty if new hydro tappets are also used during installation!



(Registration required)

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

\"2 x Camshafts Schrick for BMW S50, S52 M3 E36 6 Cyl. 4 valve

More torque and Horsepower!

Intake 316°, cam lift 13,3, valve lift at TDC 5,5, valve clearance 0,25
Exhaust 308°, cam lift 13,0, valve lift at TDC 4,5, valve clearance 0,25

Vanos system must be removed!

Base circle diam. 32mm!

Camshafts must be used with special valve springs, valve spring retainer, valve, valve cotters and tappets!

(Pic shows different cams)



\"

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

2 x Camshafts Schrick for BMW S54 B32 6 Cyl. 4 valve

Note: Schrick valve springs, retainers and rocker arms must be used!

More torque and Horsepower!

Intake 304°, cam lift 12,9 (14,00), valve lift at TDC 4,57, valve clearance 0,25
Exhaust 296°, cam lift 12,58 (14,00), valve lift at TDC 4,1, valve clearance 0,25

Valve springs, retainers and rocker arms must be used!

(Pic shows different cams)

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

2 x Camshafts Schrick for BMW S54 B32 6 Cyl. 4 valve

Note: Note: Only use camshaft with Schrick cam followers!

More torque and Horsepower!

Intake 288°, cam lift 11,6 (12,50), valve lift at TDC 0,77-8,26, valve clearance 0,25
Exhaust 280°, cam lift 11,6 (12,50), valve lift at TDC 0,62-6,25, valve clearance 0,25

Chilled cast iron camshaft, to be used with Schrick rocker arms!

(Pic shows different cams)


\"

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

2 x Camshafts Schrick for BMW S54 B32 6 Cyl. 4 valve

Note: Only use camshaft with Schrick cam followers!

More torque and Horsepower!

Intake 303°, cam lift 11,6 (12,50), valve lift at TDC 1,15-8,5, valve clearance 0,25
Exhaust 296°, cam lift 11,6 (12,50), valve lift at TDC 1,35-6,6, valve clearance 0,25

Chilled cast iron camshaft, to be used with Schrick rocker arms!

(Pic shows different cams)

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

2 x Camshafts Schrick for BMW S54 B32 6 Cyl. 4 valve

Note: Schrick valve springs, retainers and rocker arms must be used!

More torque and Horsepower!

Intake 288°, cam lift 12,9 (14,00), valve lift at TDC 0,9-8,9, valve clearance 0,25
Exhaust 280°, cam lift 12,58 (14,00), valve lift at TDC 0,68-6,68, valve clearance 0,25

(Pic shows different cams)

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

2 x Camshafts Schrick for BMW S54 B32 6 Cyl. 4 valve

Note: Only use camshaft with Schrick cam followers!

More torque and Horsepower!

Intake 280°, cam lift 11,6 (12,50), valve lift at TDC 0,55-8,0, valve clearance 0,25
Exhaust 272°, cam lift 11,6 (12,50), valve lift at TDC 0,55-6,15, valve clearance 0,25

Chilled cast iron camshaft, to be used with Schrick rocker arms!

(Pic shows different cams)

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

\"4 Camshafts Schrick for BMW S85 M5, M6 10 Cyl. 4 valve

More torque and Horsepower!

2 x Intake 292°, cam lift 12,2, valve lift at TDC 0,04-6,55, for hydr. lifters
2 x Exhaust 280°, cam lift 12,2, valve lift at TDC 02-3,8, for hydr. lifters

Check clearance between cam lobes and cyl. head!

Attention: Schrick will only give warranty if for assembly NEW hydraulic lifters will be used!

(Pic shows different cams)
\"

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

\"4 Camshafts Schrick for BMW S65 M3 E92 V8 4 valve

More torque and Horsepower!

2 x Intake 284°, cam lift 12,0, valve lift at TDC 0,15-6,72, for hydr. lifters
2 x Exhaust 284°, cam lift 12,0, valve lift at TDC 0,17-5,05, for hydr. lifters

Attention: Schrick will only give warranty if for assembly NEW hydraulic lifters will be used!

(Pic shows different cams)
\"

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

4 Camshafts Schrick for BMW S65 M3 E92 V8 4 valve

More torque and Horsepower!

Note: Schrick valve springs and retainers must be used! These can be found below at the accessories.

2 x Intake 292°, cam lift 12,20, valve lift at TDC 0,4-7,37, for hydr. lifters
2 x Exhaust 292°, cam lift 12,20, valve lift at TDC 0,35-5,75, for hydr. lifters

Attention: Schrick will only give warranty if for assembly NEW hydraulic lifters will be used!

(Pic shows different cams)
\"

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]

\"4 Camshafts Schrick for BMW S62 V8 Cyl. 4 valve M5 E39, Z8

More torque and Horsepower!

2 x Intake 268°, cam lift 11,3, valve lift at TDC 0,1-6,15, for hydr. lifters
2 x Exhaust 268°, cam lift 11,3, valve lift at TDC 01-6,15, for hydr. lifters

Check clearance between cam lobes and cyl. head!

Attention: Schrick will only give warranty if for assembly NEW hydraulic lifters will be used!

(Pic shows different cams)
\"

Manufacturer

Information about the manufacturer

SCHRICK

AVL SCHRICK Performance Components GmbH

Dreherstraße 5, 42899 Remscheid, Germany

[email protected]