Маслен охладител Mitsubishi

Mitsubishi oil cooler kit with 13 rows oil cooler.

The high-quality oil cooler kit prevents excessive oil temperatures and ensures constant oil pressure. Also, the engine seals do not harden, which positively affects the life of the engine.

Depending on placement, a reduction in oil temperature of up to 25°C is achieved.

Complete kit:

• 13 row oil cooler
• BAR-TEK® oil cooler flange with thermostat. (approx.80°C)
• Nylon/Steel Steel Jacketed Dash 8 High Pressure Lines
• Complete gasket and mounting hardware
• Please specify year of manufacture and vehicle type when ordering,

This kit is not only easy to install: Because of its quality craftsmanship, you\'ll have consistent oil temperature and control over oil pressure.

The BAR-TEK Next Generation Oil Cooler Flange is a BAR-TEK development. The flange is made of aluminum and is machined from solid. The black anodized finish not only looks good, but also protects the flange from corrosion. The internal thermostat ensures an optimum oil temperature of 80°C - 90°C. It is completely maintenance free. With the 1/8 NPT connection you can also install a temperature and oil pressure gauge. To make the installation easier, we have replaced the conventional screw with a 12mm screw with a hexagon nut. This way you can align and fix your oil cooler flange at the same time, even with normal tools. The steel screw is galvanized.

Attention: for cars with an engine capacity up to 2000ccm we recommend to use a 13 row oil cooler and over 2000ccm we recommend to use a 19 row oil cooler (both kits you can find in our shop).

Suitable for the following vehicles:

• Carisma(all)
• EVO 6/7/8/9/10(all)
• Colt II petrol engine(02/84-04/88)
• Colt III petrol engine(04/88-05/92)
• Colt IV(04/92-08/95)
• Colt V(09/95-05/04)
• Colt VI Petrol(from 06/04)
• CZC Convertible(from 05/06)
• Eclipse I D2_A(04/91-11/95)
• Eclipse II D3_(from 12/95)
• Galant I+II(all)
• Galant III Petrol(06/84-12/87)
• Galant III Diesel(until 06/86)
• Galant V Petrol(11/92-08/96)
• Galant VI Petrol(from 09/96)
• Galloper 3,0 V6(from 02/99)
• Grandis petrol 2,4(from 04/04)
• Lancer I+II(all)
• Lancer III Petrol(all)
• Lancer IV Petrol C6A_/C7_A(all)
• Lancer V Petrol CB_/CD_(all)
• Lancer VI CK_/CP_(from 12/95)
• Pajero I petrol engine(01/83-11/90)
• Pajero II Petrol V2_W/V4_W(12/90-04/00)
• Pajero III (V60) petrol engine(from 04/00)
• Pajero IV (V80) Petrol engine(from 02/07)
• Pajero Pinin H6_W/H7_W(from 10/99)
• Pajero Sport (K90) Petrol engine(from 11/98)
• Santamo(from 05/99)
• Sapporo(all)
• Sigma(12/90-07/96)
• Space Gear petrol engine(from 05/95)
• Space Runner gasoline(10/91-08/99)
• Space Runner (N50)(from 08/99)
• Space Star (DG0)(from 06/98 )
• Space Wagon petrol(01/84-04/91)
• Space Wagon petrol(10/91-10/98)
• Starion(06/82-06/90)
• Tredia(all)
• 3000 GT(from 06/92)
• L 200 petrol(from 11/89)

Here is our video with all the information about an oil cooler

Universal oil cooler kit with 19 rows of oil coolers.

The high-quality oil cooler kit prevents too high oil temperatures and constantly ensures a constant oil pressure. Also, the engine seals do not harden, which positively affects the life of the engine.

Depending on the placement, a reduction of the oil temperature of up to 25 ° C is achieved.

31 piece complete kit:

• 19 rows of oil coolers
• BAR-TEK® oil cooler flange with thermostat. (About 80°C)
• Steel-coated high-pressure lines finished pressed
• Complete sealing and installation material
• Installation instructions (please download the PDF on the right)

Please specify the year and vehicle type when ordering

Not only is this kit easy to install, its high quality workmanship gives you a constant oil temperature and oil pressure control. Your engine has a long service life thanks to the finished steel sheathed cables.

The BAR-TEK Next Generation oil cooler flange is a development of BAR-TEK. The flange is made of aluminum and is milled from solid. The black anodised surface not only looks good, but also protects the flange against corrosion. The internally installed thermostat ensures an optimum oil temperature of 80 ° C - 90 ° C. It is completely maintenance free. With the 1/8 NPT connection, you can also install a temperature and oil pressure gauge. To facilitate assembly, we replaced the conventional screw with a 12mm hex socket nut. So you can also align with normal tool your oil cooler flange and fasten at the same time. The steel screw is galvanized.

Attention: With a capacity of up to 2000ccm we belong to a 13 row oil cooler, and over 2000ccm we find a 19 row oil cooler (you can find both kits in our shop).

Fits for:

• Carisma(all)
• EVO 6/7/8/9/10(all)
• Colt II Gasoline Engine(02/84-04/88)
• Colt III Gasoline Engine(04/88-05/92)
• Colt IV(04/92-08/95)
• Colt V(09/95-05/04)
• Colt VI Gasoline Engine(from 06/04)
• CZC Cfromriolet(from 05/06)
• Eclipse I D2_A(04/91-11/95)
• Eclipse II D3_(from 12/95)
• Galant I+II(all)
• Galant III Gasoline Engine(06/84-12/87)
• Galant III Diesel(to 06/86)
• Galant V Gasoline Engine(11/92-08/96)
• Galant VI Gasoline Engine(from 09/96)
• Galloper 3,0 V6(from 02/99)
• Grandis Gasoline Engine 2,4(from 04/04)
• Lancer I+II(all)
• Lancer III Gasoline Engine(all)
• Lancer IV Gasoline Engine C6A_/C7_A(all)
• Lancer V Gasoline Engine CB_/CD_(all)
• Lancer VI CK_/CP_(from 12/95)
• Pajero I Gasoline Engine(01/83-11/90)
• Pajero II Gasoline Engine V2_W/V4_W(12/90-04/00)
• Pajero III (V60) Gasoline Engine(from 04/00)
• Pajero IV (V80) Gasoline Engine(from 02/07)
• Pajero Pinin H6_W/H7_W(from 10/99)
• Pajero Sport (K90) Gasoline Engine(from 11/98)
• Santamo(from 05/99)
• Sapporo(all)
• Sigma(12/90-07/96)
• Space Gear Gasoline Engine(from 05/95)
• Space Runner Gasoline Engine(10/91-08/99)
• Space Runner (N50)(from 08/99)
• Space Star (DG0)(from 06/98 )
• Space Wagon Gasoline Engine(01/84-04/91)
• Space Wagon Gasoline Engine(10/91-10/98)
• Starion(06/82-06/90)
• Tredia(all)
• 3000 GT(from 06/92)
• L 200 Gasoline Engine(from 11/89)

Here is our video with all information about an oil cooler: