Ковани Биели VW VR6 2.8 2.9 12V

High-strength steel connecting rods with I-Beam for VR6 engines

The connecting rods of your tuned VR6 engine have to withstand a lot if you want an extreme performance boost. Here, very intense forces are exerted, for which the engines unfortunately are no match. In order to prevent the connecting rods from tearing, you should thus turn to our high-strength, 164x20 mm steel connecting rods with I-beam for VR6 12V and V6 24V engines. They are milled from solid metal, thus extremely robust and yet very lightweight. This makes it to the perfect connecting rod set for your tuning project!

This makes our VR6 connecting rod perfect for high performance

• high-strength, milled from solid metal
• suitable for big performance boosts
• extremely lightweight and very stable
• incl. 5/16\" ARP bolts
• 6 pieces per set

The steel connecting rods are suitable for VW VR6 12V and V6 24V engines with 164-×-20-mm connecting rods.

(sample image)

Installing VR6 connecting rod correctly

In order to ensure you are safely on the move at all times, your VR6 connecting rods should be installed correctly. It is important for the connecting rod bolts to be tightened professionally. We explain how this works on the info page for correctly tightening connecting rod bolts. If you want to play it safe and only let pros look at your connecting rods, we will tend to the installation for you. Just contact us and arrange an appointment.

More information on how to properly tighten the connecting rod bolts

Manufacturer

Information about the manufacturer

BAR-TEK®

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3, 51491 Overath-Brombach, Germany

[email protected]

High-strength steel connecting rods with H-shafts for VR6 engines

The conrods of your tuned VR6 engine have to withstand a lot if you are aiming for an extreme increase in performance. Particularly with turbocharged engines, attention must be paid to the compression ratio. Our short VR6- conrods offer you the opportunity to reduce the compression in order to avoid knocking.

Tuned engines are subject to enormous forces, which the standard connecting rods are unfortunately unable to cope with. To prevent the conrods from tearing, you should therefore use our high-strength 161 x 20 mm steel connecting rods with I-shafts for VR6 12V and V6 24V engines. Our conrods are milled from solid material, making them extremely stable and very light at the same time. This makes them the perfect connecting rod set for your tuning project!

This makes our short VR6- conrods perfect for high performance:

• High-strength milled from solid material.
• Suitable for high performance increases.
• Extremely light and very stable.
• Incl. 5/16\" ARP 2000 screws.
• 6 pieces per set.
• Spacing 161 mm!
• For turbo conversions.
• Up to 800 hp.

The steel connecting rods are suitable for VW VR6 12V and V6 24V engines, are only 161 mm shorter than the 164 mm standard connecting rods and are therefore particularly suitable for turbo conversions.

(example picture)

Install VR6- conrods correctly

Further information on the correct tightening of the connecting rod bolts HERE

Manufacturer

Information about the manufacturer

BAR-TEK®

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3, 51491 Overath-Brombach, Germany

[email protected]

Optimal set for VR6 turbo engines: Wiseco pistons and BAR-TEK® connecting rods

The dream team: Forged pistons & X-Beam steel connecting rods from Wiseco & BAR-TEK® for your VR6 turbo engine. With this Kombo you have perfectly coordinated parts, with which you can easily drive power over 1000 hp.

The set includes forged pistons from Wiseco, X-Beam steel conrods from us and ACL racing bearings. The X-beam connecting rods are perfectly designed for extreme performance. The increased cross section distributes the load and reduces it in this way. This makes the connecting rods very crack resistant and stable at extremely low weight (599 grams including bolts).

The Wiseco pistons are also designed for maximum performance. With special alloys and coatings, they are resistant and extremely light. Friction is also significantly reduced. Because the piston ring webs are extra wide, you can easily bring over 3.5 bar boost pressure and over 1000 hp onto the road. From 2 bar you should upgrade to our reinforced turbo piston pins.

With this set you save money and time, because all parts are perfectly matched to each other. In addition they harmonize wonderfully with each other, so that you can get the maximum performance from your VR6 engine!

Features of the Wiseco pistons:

• Piston ring stays are extra 5-8mm wide (instead of normal 3-5mm)
• Original Wiseco with coating
• Extremely light due to special alloy
• Reinforced for maximum performance
• Bore hole in 82.00 mm, 82.50 mm and 83.00 mm
• 20 mm piston pin
• Compaction 8.5:1
• Piston shirt coated for less friction
• Complete set incl. piston pins, rings and clips
• Installation and drilling dimensions enclosed

Features X-Beam connecting rod:

• Original BAR-TEK®
• high strength milled from solid material
• suitable for extreme performance increases up to approx. 1000 hp
• extremely light and very stable
• Magnaflux inspected
• 6 pieces per set
• With ARP 2000 expansion bolts 5/16\" (reusable)
• ARP Assembly paste
• Weight per connecting rod with screws only 599 g
• With additional bore for piston pin lubrication

Features ACL bearings:

• Performance bearing
• Coated
• Extra bore for piston pin (optional)

Suitable for:

All VR6 engines as installed in the Corrado or Golf 3.

The compression specified is achieved in conjunction with a 1.65 mm cylinder head gasket.

Here you can find our compression calculator to determine your desired compression.

More information on how to properly tighten the connecting rod bolts

Manufacturer

Information about the manufacturer

BAR-TEK®

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3, 51491 Overath-Brombach, Germany

[email protected]

Wiseco & BAR-TEK®: Pistons and connecting rods in a set for maximum performance

Pretty good team: Forged pistons from Wiseco, I-Beam steel connecting rods from BAR-TEK® and ACL connecting rod bearings for your V6 turbo engine. This exclusive set is perfect for ambitious tuning fans who want to put up to 1000 hp on the road.

The complete set consists of high-performance forged pistons from Wiseco, BAR-TEK® I-Beam steel rods and ACL bearings. The pistons are reinforced for maximum performance and yet extremely light thanks to an alloy. The coated piston skirt reduces abrasion. The piston rings of Wiseco pistons are wider than normal pistons. This means that charging pressures of over 3.5 bar can also be driven without any problems.  From a boost pressure of 2 bar you should upgrade to our reinforced turbo piston pins.

Our V6 connecting rods are made for sporty drivers: They are also extremely light, milled from the solid and therefore very stable. Due to the I-Beam they are crack-proof and can withstand highest loads!

Since all parts in this set are perfectly matched to each other, you have the optimal kit for maximum performance of your V6 engine.

Features of the Wiseco pistons:

• Piston ring stays are extra 5-8mm wide (instead of normal 3-5mm)
• Original Wiseco with coating
• Extremely light due to special coating
• Reinforced for maximum performance
• 20 mm piston pin
• Compaction 8.5:1
• Piston shirt coated for less friction
• Complete set incl. piston pins, rings and clips
• Installation and drilling dimensions enclosed

Features of the BAR-TEK I-Beam connecting rod:

• Original BAR-TEK®
• high strength milled from solid material
• suitable for extreme performance increases up to approx. 1000 hp
• extremely light and very stable
• Magnaflux inspected
• 6 pieces per set
• With ARP 2000 expansion bolts 3/8\" (reusable)
• ARP Assembly paste
• Weight per connecting rod with screws only 599 g
• With additional bore for piston pin lubrication

Features of the ACL bearings:

• Performance bearings
• Coated
• Extra drilling for piston pin (optional)

Suitable for:

All V6 engines, for example installed in the Golf Mk4

The specified compression is achieved in combination with a 0.65 mm cylinder head gasket. Here you can find our compression calculator to determine your desired compression.

More information on how to properly tighten the connecting rod bolts

Manufacturer

Information about the manufacturer

BAR-TEK®

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3, 51491 Overath-Brombach, Germany

[email protected]

Spezial Conrods by CARRILLO for all VW VR6 12V engines with 164x20mm connecting rods.

Carrillo is a leading manufacturer of premium rod. Carrillo steel connecting rods are very stability, very high quality and precise processing.

The CARRILLO conrods will fit for all VW VR6 12V engines with 164x20 conrods.

Including 6 pieces with special Carrillo bolts 8mm.

Manufacturer

Information about the manufacturer

Carrillo

Pankl AG

Industriestraße West 4 A-8605 Kapfenberg, Austria

[email protected]

Product detailed specification Manufacturer: FCP EngineeringModel: FCPRHVW16456820B5/16"Profile: H-beamC to C: 164mmBig end diameter: 56.8mmPin diameter: 20mmQuantity: 6 pcs., 12 pcs. ARP2000 5/16" boltsMade of: forged steel 4340 EN24erAdvertised horsepower rating: 800HP (6 cylinder)Advertised RPM rating: 9000RPMAudi A3 / TT - 3.2 (BFH, BML)VW Golf / Jetta - 2.8 2.9 (AAA, AFP, BDF, AQP, AUE, BDE)VW Corrado - 2.8 2.9 (AAA, AFP)VW Golf / New Beetle R32 - 3.2 (BFH, BML)VW Golf / Jetta - 2.3 VR5 (AGZ, AQN)Reached 1103HP by our clients with out any fail!http://www.youtube.com/watch?v=M5vbbLFflI0

Manufacturer: FCP EngineeringModel: FCPRHVW16156820B5/16Profile: H-beamC to C: 161mmBig end diameter: 56.8mmPin diameter: 20mmQuantity: 6 pcs., 12 pcs. ARP2000 5/16" boltsMade of: forged steel 4340 EN24erAdvertised horsepower rating: 800HP (6 cylinder)Advertised RPM rating: 9000RPMMade to be used with standard pistons and Turbo