Ковани Биели VW 3.2 3.6 R32 R36 24V

High-strength steel connecting rods for R32 engines

Perfect for tuning enthusiasts driving with R32 engines featuring 164 x 20 mm connecting rods: Our steel connecting rods with I-beam profile. Thanks to their shape, the connecting rods can withstand extreme power boosts and are also pleasantly lightweight. They are high-strength and milled from solid metal, making them very robust. The standard connecting rods have not been developed for high loads, and our connecting rods are absolutely essential for this purpose.

This is what our R32 I-Beam connecting rods can do

• high-strength and milled from solid metal
• suitable for big performance boosts
• extremely lightweight and very stable
• incl. 3/8\" ARP bolts
• 6 pieces per set
• suits also V6 and VR6 block with min. 82,50mm bore size

The steel connecting rods are suitable for VW R32 engines with 164-×-20-mm connecting rods and 3/8\" bolts.

With our special design those rods will also fit V6 & VR6 Blocks with a minimum bore of 82,50mm. Than you can use 3/8\" ARP bolts that are much stronger as normal 5/16\" bolts for VR6.

Installing R32 connecting rods correctly

In order to enable you to harness the full performance our connecting rods are capable of, you must install them correctly. Therefore, we have already created a comprehensive description of how to tighten the connecting rod bolts for you. If you want to have your R32 connecting rods installed professionally right from the start, just make an appointment with us under Contact. We look forward to your e-mail or call!

More information on how to properly tighten the connecting rod bolts

Manufacturer

Information about the manufacturer

BAR-TEK®

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3, 51491 Overath-Brombach, Germany

[email protected]

Wiseco & BAR-TEK® Pistons and connecting rods in a set for maximum performance

Pretty good team: Forged pistons from Wiseco, I-Beam steel connecting rods from BAR-TEK® and ACL connecting rod bearings for your R32 turbo engine. This exclusive set is perfect for ambitious tuning fans who want to put up to 1000 hp on the road.

The complete set consists of high-performance forged pistons from Wiseco, BAR-TEK® I-Beam steel rods and ACL bearings. The pistons are reinforced for maximum performance and yet extremely light thanks to an alloy. The coated piston skirt reduces abrasion. The piston rings of Wiseco pistons are wider than normal pistons. This means that charging pressures of over 3.5 bar can also be driven without any problems.  From a boost pressure of 2 bar you should upgrade to our reinforced turbo piston pins.

Our R32 connecting rods are made for sporty drivers: They are also extremely light, milled from the solid and therefore very stable. Due to the I-Beam they are crack-proof and can withstand highest loads!

Since all parts in this set are perfectly matched to each other, you have the optimal kit for maximum performance of your R32 engine.

Features of the Wiseco pistons:

• Piston ring stays are extra 5-8mm wide (instead of normal 3-5mm)
• Original Wiseco with coating
• Extremely light due to special coating
• Reinforced for maximum performance
• bore 84,00 mm, 84,25 mm 84,50 mm and 85,00 mm
• 20 mm piston pin
• Compaction 8.5:1
• Piston shirt coated for less friction
• Complete set incl. piston pins, rings and clips
• Installation and drilling dimensions enclosed

Features of the BAR-TEK I-Beam connecting rod:

• Original BAR-TEK®
• high strength milled from solid material
• suitable for extreme performance increases up to approx. 1000 hp
• extremely light and very stable
• Magnaflux inspected
• 6 pieces per set
• With ARP 2000 expansion bolts 3/8\" (reusable)
• ARP Assembly paste
• Weight per connecting rod with screws only 599 g
• With additional bore for piston pin lubrication

Features of the ACL bearings:

• Performance bearings
• Coated
• Extra drilling for piston pin (optional)

Suitable for:

All R32 engines, for example installed in the Golf Mk4, Golf Mk5 or Audi A3 or TT.

The specified compression is achieved in combination with a 1.65 mm cylinder head gasket. Here you can find our compression calculator to determine your desired compression.

Picture Similar

More information on how to properly tighten the connecting rod bolts

Manufacturer

Information about the manufacturer

BAR-TEK®

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3, 51491 Overath-Brombach, Germany

[email protected]

Spezial Conrods by CARRILLO for all VW 3.6L R36 engines with 164x20mm connecting rods.

Carrillo is a leading manufacturer of premium rod. Carrillo steel connecting rods are very stability, very high quality and precise processing.

The CARRILLO conrods will fit for all VW R36 engines with 164x20 conrods.

Including 6 pieces with special Carrillo bolts 9mm.

More information on accurate Conrod fastening procedure click HERE

Manufacturer

Information about the manufacturer

Carrillo

Pankl AG

Industriestraße West 4 A-8605 Kapfenberg, Austria

[email protected]

Spezial Conrods by CARRILLO for all VW 3.2L R32 engines with 164x20mm connecting rods.

Carrillo is a leading manufacturer of premium rod. Carrillo steel connecting rods are very stability, very high quality and precise processing.

The CARRILLO conrods will fit for all VW R32 engines with 164x20 conrods.

Including 6 pieces with special Carrillo bolts 9mm.

More information on accurate Conrod fastening procedure click HERE

Manufacturer

Information about the manufacturer

Carrillo

Pankl AG

Industriestraße West 4 A-8605 Kapfenberg, Austria

[email protected]

Manufacturer: FCP EngineeringModel: FCPRHVW16156820B3/8Profile: H-beamC to C: 161mmBig end diameter: 56.8mmPin diameter: 20mmQuantity: 6 pcs., 12 pcs. ARP2000 3/8" boltsMade of: forged steel 4340 EN24erAdvertised horsepower rating: 800HP (6 cylinder)Advertised RPM rating: 9000RPMMade to be used with standard pistons and Turbo

Product detailed specification Manufacturer: FCP EngineeringModel: FCPRHVW16456820B5/16"Profile: H-beamC to C: 164mmBig end diameter: 56.8mmPin diameter: 20mmQuantity: 6 pcs., 12 pcs. ARP2000 5/16" boltsMade of: forged steel 4340 EN24erAdvertised horsepower rating: 800HP (6 cylinder)Advertised RPM rating: 9000RPMAudi A3 / TT - 3.2 (BFH, BML)VW Golf / Jetta - 2.8 2.9 (AAA, AFP, BDF, AQP, AUE, BDE)VW Corrado - 2.8 2.9 (AAA, AFP)VW Golf / New Beetle R32 - 3.2 (BFH, BML)VW Golf / Jetta - 2.3 VR5 (AGZ, AQN)Reached 1103HP by our clients with out any fail!http://www.youtube.com/watch?v=M5vbbLFflI0

Product detailed specification Manufacturer: FCP EngineeringModel: FCPRHVW16456820B3/8"Profile: H-beamC to C: 164mmBig end diameter: 56.8mmPin diameter: 20mmQuantity: 6 pcs., 12 pcs. ARP2000 3/8" boltsMade of: forged steel 4340 EN24erAdvertised horsepower rating: 800HP (6 cylinder)Advertised RPM rating: 9000RPM

Manufacturer: FCP EngineeringModel: FCPRHVW16156820B5/16Profile: H-beamC to C: 161mmBig end diameter: 56.8mmPin diameter: 20mmQuantity: 6 pcs., 12 pcs. ARP2000 5/16" boltsMade of: forged steel 4340 EN24erAdvertised horsepower rating: 800HP (6 cylinder)Advertised RPM rating: 9000RPMMade to be used with standard pistons and Turbo

Spezial Conrods by K1 for all VW R32 engines with 164x20mm conrods.

Very light and for extreme performance.
Including 6 pieces with ARP rod bolts.

The K1 conrods will fit for all VW R32 engines with 164x20mm conrods.

(Example picture, it will be delivered 6 pcs.)

Manufacturer

Information about the manufacturer

K1

K1 Technologies

7201 Industrial Park Blvd. Mentor, OH 44060, United States

[email protected]

EU responsible person

Race Winning Brands Europe B.V.

Pesetaweg 27 2153PJ Nieuw-Vennep, The Netherlands

[email protected]