Ковани Биели Audi RS6 V8 TFSI

Innovative H-Beam conrods for all 4.0L TFSI as installed in Audi S6, S7, S8, RS6 and RS7.

Our H-Beam conrods are best suited for performance upgraded 4.0L TFSI engines. From 750 HP you should definitely change to our upgrade-conrod, because the series connecting rods can not always withstand the high load.

Thanks to the H-shank design, these conrod are extremely rigid and can therefore withstand high boost pressures without bending. In addition to the stability, the performance of this conrod is also legendary: You can bring up to 1000 HP on the road! Of course, the racetrack must also be installed no gram too much. That\'s why our conrod are also extremely light. 

In addition, they are precisely angled and tested by us. So you can also rely on the safety of this conrod hundred percent! The conrod come with ARP 2000 expansion bolts. How to tighten the connecting rod screws correctly, we have summarized for you.

For an optimal set you should order the matching conrod bearing shells directly with your order.

Features of our H-Beam conrods:

• high strength milled from solid material
• suitable for extreme power increases up to approx. 1000 HP
• extremely light and very stable
• Magnaflux inspected
• 8 pieces per set
• Dimensions: 153 x 22 mm
• With ARP 2000 expansion screws 3/8\"
• precisely angled and tested in our house

The conrod have no trapezoid and are therefore not suitable for series piston.

More information on how to correctly tighten the connecting rod bolts HERE

Manufacturer

Information about the manufacturer

BAR-TEK®

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3, 51491 Overath-Brombach, Germany

[email protected]

Innovative h-beam conrods for all 4.0L TFSI engines as installed in the Audi RS6 and RS7 C8

Our h-beam conrods are ideally suited for performance-enhanced 4.0L TFSI engines. From 750 hp you should definitely switch to our upgrade- conrods, as the standard connecting rods cannot always withstand the high load.

Thanks to the H-shaft design, these conrods are extremely rigid and can therefore withstand high boost pressures without bending. In addition to the stability, the performance of these conrods is also incredible: you can safely put over 1000 hp on the road! Of course, not a single gram should be too much for the racetrack. That\'s why our conrods are also extremely light.

They are also precisely angled and tested by us. So you can rely on the safety of these conrods one hundred per cent! The conrods come with ARP 2000 expansion bolts. We have summarised for you how to tighten the connecting rod bolts correctly.

Features of our h-beam conrods:

• high-strength milled from solid material
• suitable for extreme power increases over 1000 hp
• extremely light and very stable
• Magnaflux inspected
• 8 pieces per set
• Dimensions: 153 x 22 mm
• With ARP 2000 expansion bolts 3/8\"
• precisely angled and tested in-house

The conrods do not have a trapezoid and are therefore not suitable for series piston

Manufacturer

Information about the manufacturer

BAR-TEK®

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3, 51491 Overath-Brombach, Germany

[email protected]

Product detailed specification Manufacturer: FCP EngineeringModel: FCPRHA153V822-8Profile: H-beamC to C: 153mmPin diameter: 22mmQuantity: 8 pcs., 16 pcs. ARP2000 3/8" boltsMade of: forged steel 4340 EN24erAdvertised horsepower rating: 1000HP (8 cylinder)Advertised RPM rating: 9000RPMFit for:Audi S6 C7, RS6 C7, S7, RS7, A8 D4, A8 D5, S8 D4 - 4.0 V8 TFSIBentley Continental V8, Flying Spur V8

Product detailed specification Manufacturer: FCP EngineeringModel: FCPRHA155V822-8Profile: H-beamC to C: 155mmPin diameter: 22mmQuantity: 8 pcs., 16 pcs. ARP2000 3/8" boltsMade of: forged steel 4340 EN24erAdvertised horsepower rating: 1000HP (8 cylinder)Advertised RPM rating: 9000RPMFits for Audi S6 C8 - 4.0 V8 TFSI

Connecting rods data:Manufacturer: FCP EngineeringModel: FCPRHA15523-8Profile: H-beamC to C: 155mmPin diameter: 23mmQuantity: 8 pcs., 16 pcs. ARP2000 3/8" boltsMade of: forged steel 4340 EN24erAdvertised horsepower rating: 1000HP (8 cylinder)Advertised RPM rating: 9000RPMPistons data:Manufacturer: JE PistonsBore size: 86.00mmCompression ratio (CR): originalPin diameter: 23mmDome volume: -0.8ccCH: 30mmSuitable for:Audi RS6 C8 - 4.0 V8 TFSILamborghini Urus 4.0 V8Porsche Panamera Turbo 4.0 V8