Ковани Биели Audi R8 V10
-
High Strength Innovative X-Shaft Steel Connecting Rods for your Audi RS4 B7, R8 V8 or V10 and Lamborghini Gallardo & Huracan .
The conrod of your tuned V10 have to withstand a lot if you are aiming for an extreme power increase, such as a supercharger or turbo conversion. Enormous forces are at work here, which the standard connecting rods are unfortunately not able to withstand. To ensure that the conrod can cope with such high performance, you should therefore use high-strength steel connecting rods. They are milled from the solid, therefore extremely stable and at the same time very light. This makes them the perfect connecting rod set for your tuning project!
To ensure optimum lubrication of the piston pins, our X-Beam conrods have an additional oil riser hole (rifle drilled). In addition, they are precisely angled and tested by us. So you can also rely one hundred percent on the safety of this conrod!
This makes our conrod perfect for extreme performance:- Original BAR-TEK®
- high-strength milled from the solid
- suitable for extreme power increases of over 1000 HP
- extremely light and very stable
- Super Alloy Finish
- Magnaflux inspected
- Dimensions: 154 x 20mm
- 20mm piston pin
- 8 or 10 pieces per set
- incl. 5/16\" ARP2000 connecting rod bolts
- With additional bore for piston pin lubrication (rifle drilled)
- precisely angled and tested in our factory
In order to be safe on the road with the extreme performance, your conrod should be mounted correctly. Here it is important to tighten the connecting rod screws professionally. We explain how this works on the information page on the correct tightening of connecting rod bolts. If you want to be on the safe side and only let professionals work on your conrod, we will do the assembly for you. Just contact us and make an appointment.
Manufacturer
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
-
High-strength titanium-nitrided X-shafted steel connecting rods for your Audi RS4 B7, R8 V8 or V10.
The conrods of your V8 or V10 are exposed to extraordinary pressure loads. When increasing performance with a turbo or supercharger conversion, the standard connecting rods very quickly reach their limits.We have developed our titanium-nitrided X-shaft conrods to counteract this. Our conrods are milled from solid material and then titanium nitrided.
The titanium nitride is a compound of titanium and nitrogen, which additionally hardens our conrods and makes it extremely corrosion-resistant. This gives you the stability, rigidity and durability you need for your V10. This makes them the perfect connecting rod set for your tuning project!
In addition, our x-shaft conrods come with a rifle drilled oil riser hole, which ensures that the piston pins are optimally lubricated.
This makes our conrods perfect for extreme performance:
- Original BAR-TEK®® .
- suitable for extreme power increases of over 1000 hp.
- extremely light and very stable.
- Titanium-nitrided.
- high-strength milled from the solid.
- Dimensions: 154 x 20mm.
- 20mm piston pin.
- 8 or 10 pieces per set.
- incl. ARP2000 connecting rod bolts.
- With additional bore for piston pin lubrication (rifle drilled).
It is particularly important for extreme performance that your conrods is fitted correctly. You can find more information on this in our guide \"Tighten conrods correctly\".
Manufacturer
Information about the manufacturer
BAR-TEK®
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
-
High-strength steel connecting rods with H-Beam for 5.2L V10 engines
The connecting rods of your tuned V10 engine have to withstand a lot if you want an extreme performance boost, like a turbocharger conversation. Here, very intense forces are exerted, for which the engines unfortunately are no match. In order to prevent the connecting rods from tearing, you should thus turn to high-strength steel connecting rods. They are milled from solid metal, thus extremely robust and yet very lightweight. This makes it to the perfect connecting rod set for your tuning project!
This makes the connecting rod perfect for high performance
- high-strength milled from the solid
- suitable for high performance increases
- extremely light and very stable
- Dimensions: 154 x 20mm
- 20mm piston pin
- Weight: approx. 520 g
- 10 pieces per set with Carrillo expansion screws
- Installing connecting rods correctly
In order to ensure you are safely on the move at all times, your connecting rods should be installed correctly. It is important for the connecting rod bolts to be tightened professionally. We explain how this works on the info page for correctly tightening connecting rod bolts. If you want to play it safe and only let pros look at your connecting rods, we will tend to the installation for you. Just contact us and arrange an appointment.
(sample image)
Manufacturer
Information about the manufacturer
Carrillo
Pankl AG
Industriestraße West 4 A-8605 Kapfenberg, Austria
-
Product detailed specificationManufacturer: FCP EngineeringModel: FCPRHA15420R8-10Profile: H-beamC to C: 154mmBig end diameter: 56.80mmPin diameter: 20mmQuantity: 10 pcs., 20 pcs. ARP2000 3/8" boltsMade of: forged steel 4340 EN24erAdvertised horsepower rating: 1500HP+Advertised RPM rating: 9000RPMAudi R8 / Lamborghini Gallardo - 5.2 V10
Топ производители
