Ковани Биели Audi A6 2.8 S4 2.7 Biturbo

Special H-connecting rods from Auto Verdi for all Audi 2.7L V6 biturbo as in the S4 and RS4 B5.

We recommend forged connecting rods from a power of 500PS upwards, since the standard connecting rods have not been developed for high loads. The Auto Verdi connecting rods are characterized by top quality and best workmanship. In conjunction with the 3/8 \"ARP-L19 screws, these connecting rods are also suitable for extreme performance!

Features:

• high-strength milled from solid
• suitable for extreme performance increases of 1000 HP and more
• extremely light and very stable
• Inspected Magnaflux
• 6 pieces per set
• With ARP LR19 expansion screws 3/8\"
• Crankcase diameter: 57.61 mm
• Width on the Crankshaft: 20.21 mm
• Width on the piston pin: 21.870 mm
• Made in Sweden

154mm length with 21mm piston pin.

The conrods can only be installed with the RS4 bearing shells. Only in this combination the rods can also be installed in the other (see under) 2.7L V6 engines.

Audi V6 2.7L biturbo with engine code AZB, AGB, AJK, AZA, ARE, BES, ASJ

More information on how to properly tighten the connecting rod bolts

Manufacturer

Information about the manufacturer

Auto Verdi Racing

Auto Verdi AB

Näsåkersvägen 1, 777 60 Söderbärke, Sweden

[email protected]

2.7L Biturbo Steel Connecting Rods for Extra Performance

High strength I-stem steel connecting rods from BAR-TEK® for all Audi 2.7L V6 biturbo like in the S4 and RS4 B5.

When you tune the already powerful V6 2.7L biturbo engine of your Audi S4 or RS4, you quickly reach the load capacity of the stock connecting rods. This is because the rods are subjected to such extreme forces that, in the worst case scenario, they simply snap. For extra power above 500 HP we therefore recommend our steel connecting rods with I-shaft. These are optimal if you want to enjoy the full power of your Biturbo. And we are talking about 1000 HP and more. That kind of savoring!

Why do you have more fun with our steel connecting rods?

We put a lot of emphasis on the workmanship and design of our steel connecting rods so you can focus on extreme performance gains. For the highest quality, these conrod are made from the finest materials and are machined from solid. This makes them extremely durable and at the same time they have a high bending strength. At the same time, they are so light that you can save quite a few grams. This makes them especially popular with racing fans and definitely makes for more fun on the gas pedal!

Features of the steel connecting rods:

• high-strength, milled from the solid
• suitable for extreme power increases from 1000 HP
• extremely light and very stable
• Magnaflux inspected
• 6 pieces per set
• Incl. ARP2000 expansion screws 3/8\" 40,64mm
• Crankcase diameter: 57,61 mm
• Width at crankshaft: 20,21 mm
• Width at piston pin: 21,870 mm
• 154 mm length with 21 mm piston pin.

Here\'s what else you need to know about our Audi 2.7L Biturbo S4 & RS4 I-Shaft Steel Connecting Rods:

• The conrod can only be installed with the RS4 conrod bearing shells. Only in this combination the conrod can be installed in the other 2.7L V6 engines (see below):
  Audi V6 2.7L Biturbo with engine code AZB, AGB, AJK, AZA, ARE, BES, ASJ

• If the block is not drilled, i.e. the bore remains at 81.00 mm, some material must be removed from the connecting rod sides in order to be able to mount them in the bore.

More information on how to properly tighten the connecting rod bolts HERE

Manufacturer

Information about the manufacturer

BAR-TEK®

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3, 51491 Overath-Brombach, Germany

[email protected]

Product detailed specification Manufacturer: FCP EngineeringModel: FCPRHA15457621Profile: H-beamC to C: 154mmBig end diameter: 57.6mmPin diameter: 21mmQuantity: 6 pcs., 12 pcs. ARP2000 5/16" boltsMade of: forged steel 4340 EN24erAdvertised horsepower rating: 800HP (6 cylinder)Advertised RPM rating: 9000RPMAudi A6 - 2.6 2.8 V6, S4 - 2.7 V6 Biturbo (AJK, APB, ARE, AZA, AGB, AZB)

Product detailed specificationManufacturer: FCP EngineeringModel: FCPRH150856821Profile: H-beamC to C: 150.80mmBig end diameter: 56.80mmPin diameter: 21mmQuantity: 6 pcs., 12 pcs. ARP2000 5/16" boltsMade of: forged steel 4340 EN24erAdvertised horsepower rating: 1000HP (6 cylinder)Advertised RPM rating: 9000RPMAudi RS4 - 3.0 Stroker V6 BiturboThese connecting rods can be used with OEM or aftermarket pistons and 3.0 Liter crankshaft.

Product detailed specificationManufacturer: FCP EngineeringModel: FCPRH150856822Profile: H-beamC to C: 150.80mmBig end diameter: 56.80mmPin diameter: 22mmQuantity: 6 pcs., 12 pcs. ARP2000 3/8" boltsMade of: forged steel 4340 EN24erAdvertised horsepower rating: 1000HP (6 cylinder)Advertised RPM rating: 9000RPMAudi RS4 - 3.0 Stroker V6 BiturboThese connecting rods can be used with FCP pistons and 3.0 Liter crankshaft.