Клапани VW 1.8-2.0 8V, 2.2T 10V

VITON valve stem seals for all 2.0L 8V engines.

This valve stem Seals offer the following advantages:
-High-temperature strength
-Improved sliding
-Higher-life

When using new valves and the guides must be replaced!

Price for one stem seals. You need 8pcs.

 High performance valve stem seals for all 7mm valves made by BAR-TEK®

This valve stem seals offer the following advantages:

• High-temperature strength
• Improved sliding
• Higher-life

When using new valves also the guides must be replaced!

Price for one seal.

Set of high performance coated valve cotters from Schrick. 

For 8 Valves.

Set of high performance coated valve cotters from Schrick. 

For 8 Valves (7mm)

Set of high performance coated valve cotters (clamped) from Schrick. 

For 8 Valves.

Set of high performance coated valve cotters from Schrick.

For 8 Valves (7mm)

Set of high performance coated valve cotters from Schrick. 

For 8 Valves.

 

Set of high performance valve cotters from Schrick.

Including 40 pieces

Putting a Tuning cam in Your engine don`t forget about Your Valvetrain (for 7mm valves) 

8 reinforced small and 8 big springs for higher pressures and stroke made of high quality reinforced steal reducing sprung mass and creating a faster reving engine! 

Including 16 pieces.

 

\"Putting a Tuning cam in Your engine don`t forget
about Your Valvetrain!

8 reinforced small and 8 big springs for higher pressures and stroke made of high quality reinforced steal reducing sprung mass and creating a faster reving engine!

Including 16 pieces.\"

\"Reinforced high quality Titanium valve spring retainers.

Only the top retainers are made from Titanium.
The bottom ones are made of steel.

Pic shows G60 version.\"

Product detailed specification Model number VWIVN-1014 Head diameter 40.00mm Stem diameter 6.97mm Length 91.60mm Material Black nitrided stainless steel Fits for VW / Audi - 1.8-2.0 8V

Product detailed specification Model number VWIVN-1024 Head diameter 40.00mm Stem diameter 6.97mm Length 98.60mm Material Black nitrided stainless steel Fits for VW / Audi - 1.8-2.0 8V

Product detailed specification Model number VWEVN-1014 Head diameter 33.00mm Stem diameter 6.96mm Length 90.95mm Material Black nitrided stainless steel Fits for VW / Audi - 1.8-2.0 8V

Product detailed specification Model number VWEVN-1024 Head diameter 33.00mm Stem diameter 6.96mm Length 98.40mm Material Black nitrided stainless steel Fits for VW / Audi - 1.8-2.0 8V

Product detailed specification Model number VWIVN-1027 Head diameter 41.00mm Stem diameter 6.97mm Length 98.60mm Material Black nitrided stainless steel Fits for VW / Audi - 1.8-2.0 8V

Product detailed specification Model number VWEVI-1015 Head diameter 33.50mm Stem diameter 6.96mm Length 90.95mm Material Inconel Fits for VW / Audi - 1.8-2.0 8V

High performance valve keepers from Supertech for all 1.8T, 2.7L Biturbo and 2.0L TFSI and TSI engines.

These special steel valve keepers are required when using Supertech valves with only one keyway (stock has 3 wedges).

Price for eight pairs of wedges (8 Valves).

We successfully run this Supertech valve kit in our 1.8T test Golf.

Black nitrided exhaust valves from Supertech for VW 2.0L 8V engines with 7mm shaft.

The VAG standard valves have the major disadvantage that they can break on engines with a significant increase in power or with long mileage.
The standard valves are hollow inside and sodium-cooled. With the very thin valve stem, there is not much material left to protect the valve!

Supertech valves offer the following advantages:

• High temperature resistance
• High tear resistance
• High-strength material
• Black nitrided

Available in original size (33mm) as well as 1mm and 2mm oversize.
The valve seat must be adapted for oversize valves.

The kit contains 4 exhaust valves black nitrided 3 wedge design.

Black nitrided intake valves from Supertech for VW 2.0L 8V engines with 7mm valve stem.

The VAG standard valves have the major disadvantage that they can break in engines with a significant increase in power or with long mileage.
The standard valves are hollow inside and sodium-cooled. With the very thin valve stem, there is not much material left to protect the valve!

Supertech valves offer the following advantages:

• High temperature resistance
• High tear resistance
• High-strength material
• Black nitrided
• Length: 91.60mm

Available in original size (40mm) as well as 1mm and 2mm oversize.
The valve seat must be adapted for oversize valves.

The kit contains 4 inlet valves for 3 keyways (original wedges)