Дюзи и холдър за метанол

Информация:

The water injection Hyper-Sonic nozzle is screwed into the holder and connected to our 1/4" pressure line.

Допълнителна информация:

Low profile design for easy installation of your SNOW Performance Water-Methanol nozzle. Water Injection Nozzle holder for the Boost Cooler Hyper-Sonic nozzles. The new 90°nozzle holder comes in a sleek low profile design. Securely connect the pressure line directly to your SNOW Performance water methanol nozzle. The water injection Hyper-Sonic nozzle is screwed into the holder and connected to our 1/4" pressure line. Product Features: 1x Nozzle Holder 90° low profile 2x 1/8" NPT Ports for Boost Cooler Nozzle and Fitting Material: High performance lightweight 6061-T6 CNC machined aluminum Surface treatment: Black anodized finish for durability and strength 1x 1/4" Compression Fitting for 1/4"-Pressure Line 100% Methanol Resistant

Информация:

The water injection Hyper-Sonic nozzle is screwed into the holder and connected to our 1/4" pressure line.

Допълнителна информация:

Low profile design for easy installation, straight version. Water Injection Nozzle holder for the Boost Cooler Hyper-Sonic nozzles. The new straight nozzle holder from SNOW Performance comes in a sleek low profile design. Securely connect the pressure line directly to your water methanol nozzle. The Boost Cooler water injection Hyper-Sonic nozzle is screwed into the nozzle holder and connected to our 1/4" pressure line. Product Features: 1x Nozzle Holder, low profile, straight version 2x 1/8" NPT Ports for Boost Cooler Nozzle and Fitting Material: High performance lightweight 6061-T6 CNC machined aluminum Surface treatment: Black anodized finish for durability and strength 1x 1/4" Compression Fitting for 1/4"-Pressure Line 100% Methanol Resistant

Информация:

The water injection Hyper-Sonic nozzle is screwed into the holder and connected to our ProLine steel braided lines.

Допълнителна информация:

Flat design for space-saving installation with Dash 4 / AN4 fitting, suitable for the ProLine series. Water Injection Nozzle holder for the Boost Cooler Hyper-Sonic nozzles. The new 90°-nozzle holder comes in a sleek low profile design. Securely connect the steel braided line directly to your water methanol nozzle. The water injection Hyper-Sonic nozzle is screwed into the holder and connected to our ProLine strainless steel braided line. The ProLine Nozzle Holder can also be retrofitted into existing Boost Cooler Water Methanol Injection Systems with 1/4" Nylon / FEP lines. Product Features: 1x Nozzle Holder 90° low profile, aluminium, hard anodized 2x 1/8" NPT Ports for Boost Cooler Nozzle and fitting 1x 1/8"-Dash 4 fitting, aluminium, hard anodized Material: High performance lightweight 6061-T6 CNC machined aluminum Surface treatment: Black anodized finish for durability and strength 100% Methanol Resistant

Информация:

The water injection Hyper-Sonic nozzle is screwed into the holder and connected to our ProLine steel braided lines.

Допълнителна информация:

Flat design for space-saving installation with Dash 4 connection, suitable for the ProLine series. Water Injection Nozzle holder for the Boost Cooler Hyper-Sonic nozzles. The new straight nozzle holder comes in a sleek low profile design. Securely connect the steel braided line directly to your water methanol nozzle. The water injection Hyper-Sonic nozzle is screwed into the holder and connected to our ProLine strainless steel braided line. The ProLine Nozzle Holder can also be retrofitted into existing Boost Cooler Water Methanol Injection Systems with 1/4" Nylon / FEP lines. Product Features: 1x Nozzle Holder, straight design, low profile, aluminium, hard anodized 2x 1/8" NPT Ports for Boost Cooler Nozzle and fitting 1x 1/8"-Dash 4 fitting, aluminium, hard anodized Material: High performance lightweight 6061-T6 CNC machined aluminum Surface treatment: Black anodized finish for durability and strength 100% Methanol Resistant

Информация:

Boost Cooler Hyper-Sonic Injector, 60ml/min@100psi, including fine mesh filter. Replaces Art.No. SP30301 (Size 1/60ml)

Допълнителна информация:

Flow Rate 60ml/min (1.0GPH) @ 100psi The SNOW Performance Hyper-Sonic Water-Methanol Injection Nozzle is the worlds best selling and most advanced water-meth nozzle. Constructed out of 100% methanol resistant stainless steel/zinc plating, the patented Hyper-Sonic design spins the fluid to supersonic levels before forcing it through two venturi shaped orifices to create the Hyper-Sonic micron droplet mist that has become the industry leader in water-methanol technology. Complete with a 80 micron filter, our water injection nozzle can be cleaned and re-used on any application. To unlock power hidden within your water-methanol injection system replace your nozzles with Hyper-Sonic nozzles today. The Boost Cooler Hyper-Sonic-nozzles offer up to 20µ fine atomised mist. - It's the last water-methanol injection nozzle you will ever need to buy. The key to water injection is how fine the fluid droplets are upon injection. The smaller the droplets, the more total surface area per volume injected which results in more heat reduction = more power. Because of this fact, more cooling can be done with less fluid. More of the intake charge can be filled with cold O2 - not water. Product Features: 2-chamber nozzle, Venturi-Design Nominal Flow Rate: ~ 60ml/min / 1.0 GPH Material: Stainless steel with zinc plating 80µ (micron) fine mesh filter Outer Thread: 1/8"NPT27 100% Methanol resistant

Информация:

Boost Cooler Hyper-Sonic Injector, 30ml/min@100psi, including fine mesh filter.

Допълнителна информация:

Flow Rate 30ml/min (0.5GPH) @ 100psi The SNOW Performance Hyper-Sonic Water-Methanol Injection Nozzle is the worlds best selling and most advanced water-meth nozzle. Constructed out of 100% methanol resistant stainless steel/zinc plating, the patented Hyper-Sonic design spins the fluid to supersonic levels before forcing it through two venturi shaped orifices to create the Hyper-Sonic micron droplet mist that has become the industry leader in water-methanol technology. Complete with a 80 micron filter, our water injection nozzle can be cleaned and re-used on any application. To unlock power hidden within your water-methanol injection system replace your nozzles with Hyper-Sonic nozzles today. The Boost Cooler Hyper-Sonic-nozzles offer up to 20µ fine atomised mist. - It's the last water-methanol injection nozzle you will ever need to buy. The key to water injection is how fine the fluid droplets are upon injection. The smaller the droplets, the more total surface area per volume injected which results in more heat reduction = more power. Because of this fact, more cooling can be done with less fluid. More of the intake charge can be filled with cold O2 - not water. Product Features: 2-chamber nozzle, Venturi-Design Nominal Flow Rate: ~ 30ml/min / 0.5 GPH Material: Stainless steel with zinc plating 80µ (micron) fine mesh filter Outer Thread: 1/8"NPT27 100% Methanol resistant

Информация:

Boost Cooler Hyper-Sonic Injector, 45ml/min@100psi, including fine mesh filter.

Допълнителна информация:

Flow Rate 45ml/min (0.75GPH) @ 100psi The SNOW Performance Hyper-Sonic Water-Methanol Injection Nozzle is the worlds best selling and most advanced water-meth nozzle. Constructed out of 100% methanol resistant stainless steel/zinc plating, the patented Hyper-Sonic design spins the fluid to supersonic levels before forcing it through two venturi shaped orifices to create the Hyper-Sonic micron droplet mist that has become the industry leader in water-methanol technology. Complete with a 80 micron filter, our water injection nozzle can be cleaned and re-used on any application. To unlock power hidden within your water-methanol injection system replace your nozzles with Hyper-Sonic nozzles today. The Boost Cooler Hyper-Sonic-nozzles offer up to 20µ fine atomised mist. - It's the last water-methanol injection nozzle you will ever need to buy. The key to water injection is how fine the fluid droplets are upon injection. The smaller the droplets, the more total surface area per volume injected which results in more heat reduction = more power. Because of this fact, more cooling can be done with less fluid. More of the intake charge can be filled with cold O2 - not water. Product Features: 2-chamber nozzle, Venturi-Design Nominal Flow Rate: ~ 45ml/min / 0.75 GPH Material: Stainless steel with zinc plating 80µ (micron) fine mesh filter Outer Thread: 1/8"NPT27 100% Methanol resistant

Информация:

Boost Cooler Hyper-Sonic Injector, 125ml/min@100psi, including fine mesh filter. Replaces Art.No. SP30302 (Size 2/100ml)

Допълнителна информация:

Flow Rate 125ml/min (2.0GPH) @ 100psi The SNOW Performance Hyper-Sonic Water-Methanol Injection Nozzle is the worlds best selling and most advanced water-meth nozzle. Constructed out of 100% methanol resistant stainless steel/zinc plating, the patented Hyper-Sonic design spins the fluid to supersonic levels before forcing it through two venturi shaped orifices to create the Hyper-Sonic micron droplet mist that has become the industry leader in water-methanol technology. Complete with a 80 micron filter, our water injection nozzle can be cleaned and re-used on any application. To unlock power hidden within your water-methanol injection system replace your nozzles with Hyper-Sonic nozzles today. The Boost Cooler Hyper-Sonic-nozzles offer up to 20µ fine atomised mist. - It's the last water-methanol injection nozzle you will ever need to buy. The key to water injection is how fine the fluid droplets are upon injection. The smaller the droplets, the more total surface area per volume injected which results in more heat reduction = more power. Because of this fact, more cooling can be done with less fluid. More of the intake charge can be filled with cold O2 - not water. Product Features: 2-chamber nozzle, Venturi-Design Nominal Flow Rate: ~ 125ml/min / 2.0 GPH Material: Stainless steel with zinc plating 80µ (micron) fine mesh filter Outer Thread: 1/8"NPT27 100% Methanol resistant

Информация:

Boost Cooler Hyper-Sonic Injector, 190ml/min@100psi, including fine mesh filter. Replaces Art.No. SP30305 (Size 5/375ml)

Допълнителна информация:

Flow Rate 190ml/min (3.0GPH) @ 100psi The SNOW Performance Hyper-Sonic Water-Methanol Injection Nozzle is the worlds best selling and most advanced water-meth nozzle. Constructed out of 100% methanol resistant stainless steel/zinc plating, the patented Hyper-Sonic design spins the fluid to supersonic levels before forcing it through two venturi shaped orifices to create the Hyper-Sonic micron droplet mist that has become the industry leader in water-methanol technology. Complete with a 80 micron filter, our water injection nozzle can be cleaned and re-used on any application. To unlock power hidden within your water-methanol injection system replace your nozzles with Hyper-Sonic nozzles today. The Boost Cooler Hyper-Sonic-nozzles offer up to 20µ fine atomised mist. - It's the last water-methanol injection nozzle you will ever need to buy. The key to water injection is how fine the fluid droplets are upon injection. The smaller the droplets, the more total surface area per volume injected which results in more heat reduction = more power. Because of this fact, more cooling can be done with less fluid. More of the intake charge can be filled with cold O2 - not water. Product Features: 2-chamber nozzle, Venturi-Design Nominal Flow Rate: ~ 190ml/min / 3.0 GPH Material: Stainless steel with zinc plating 80µ (micron) fine mesh filter Outer Thread: 1/8"NPT27 100% Methanol resistant

Информация:

Boost Cooler Hyper-Sonic Injector, 250ml/min@100psi, including fine mesh filter. Replaces Art.No. SP30305 (Size 4/225ml)

Допълнителна информация:

Flow Rate 250ml/min (4.0GPH) @ 100psi The SNOW Performance Hyper-Sonic Water-Methanol Injection Nozzle is the worlds best selling and most advanced water-meth nozzle. Constructed out of 100% methanol resistant stainless steel/zinc plating, the patented Hyper-Sonic design spins the fluid to supersonic levels before forcing it through two venturi shaped orifices to create the Hyper-Sonic micron droplet mist that has become the industry leader in water-methanol technology. Complete with a 80 micron filter, our water injection nozzle can be cleaned and re-used on any application. To unlock power hidden within your water-methanol injection system replace your nozzles with Hyper-Sonic nozzles today. The Boost Cooler Hyper-Sonic-nozzles offer up to 20µ fine atomised mist. - It's the last water-methanol injection nozzle you will ever need to buy. The key to water injection is how fine the fluid droplets are upon injection. The smaller the droplets, the more total surface area per volume injected which results in more heat reduction = more power. Because of this fact, more cooling can be done with less fluid. More of the intake charge can be filled with cold O2 - not water. Product Features: 2-chamber nozzle, Venturi-Design Nominal Flow Rate: ~ 250ml/min / 4.0 GPH Material: Stainless steel with zinc plating 80µ (micron) fine mesh filter Outer Thread: 1/8"NPT27 100% Methanol resistant

Информация:

Boost Cooler Hyper-Sonic Injector, 375ml/min@100psi, including fine mesh filter. Replaces Art.No. SP30305 (Size 5/375ml)

Допълнителна информация:

Boost Cooler Water Injection Nozzle - Size 6 Flow Rate 375ml/min (6.0GPH) @ 100psi The SNOW Performance Hyper-Sonic Water-Methanol Injection Nozzle is the worlds best selling and most advanced water-meth nozzle. Constructed out of 100% methanol resistant stainless steel/zinc plating, the patented Hyper-Sonic design spins the fluid to supersonic levels before forcing it through two venturi shaped orifices to create the Hyper-Sonic micron droplet mist that has become the industry leader in water-methanol technology. Complete with a 80 micron filter, our water injection nozzle can be cleaned and re-used on any application. To unlock power hidden within your water-methanol injection system replace your nozzles with Hyper-Sonic nozzles today. The Boost Cooler Hyper-Sonic-nozzles offer up to 20µ fine atomised mist. - It's the last water-methanol injection nozzle you will ever need to buy. The key to water injection is how fine the fluid droplets are upon injection. The smaller the droplets, the more total surface area per volume injected which results in more heat reduction = more power. Because of this fact, more cooling can be done with less fluid. More of the intake charge can be filled with cold O2 - not water. Product Features: 2-chamber nozzle, Venturi-Design Nominal Flow Rate: ~ 375ml/min / 6.0 GPH Material: Stainless steel with zinc plating 80µ (micron) fine mesh filter Outer Thread: 1/8"NPT27 100% Methanol resistant

Информация:

Boost Cooler Hyper-Sonic Injector, 500ml/min@100psi, including fine mesh filter.

Допълнителна информация:

Flow Rate 500ml/min (8.0 GPH) @ 100psi The SNOW Performance Hyper-Sonic Water-Methanol Injection Nozzle is the worlds best selling and most advanced water-meth nozzle. Constructed out of 100% methanol resistant stainless steel/zinc plating, the patented Hyper-Sonic design spins the fluid to supersonic levels before forcing it through two venturi shaped orifices to create the Hyper-Sonic micron droplet mist that has become the industry leader in water-methanol technology. Complete with a 80 micron filter, our water injection nozzle can be cleaned and re-used on any application. To unlock power hidden within your water-methanol injection system replace your nozzles with Hyper-Sonic nozzles today. The Boost Cooler Hyper-Sonic-nozzles offer up to 20µ fine atomised mist. - It's the last water-methanol injection nozzle you will ever need to buy. The key to water injection is how fine the fluid droplets are upon injection. The smaller the droplets, the more total surface area per volume injected which results in more heat reduction = more power. Because of this fact, more cooling can be done with less fluid. More of the intake charge can be filled with cold O2 - not water. Product Features: 2-chamber nozzle, Venturi-Design Nominal Flow Rate: ~ 500ml/min / 8.0 GPH Material: Stainless steel with zinc plating 80µ (micron) fine mesh filter Outer Thread: 1/8"NPT27 100% Methanol resistant

Информация:

Boost Cooler Hyper-Sonic Injector, 630ml/min@100psi, including fine mesh filter. Replaces Art.No. SP30306 (Size 6/625ml)

Допълнителна информация:

Flow Rate 630ml/min (6.0GPH) @ 100psi The SNOW Performance Hyper-Sonic Water-Methanol Injection Nozzle is the worlds best selling and most advanced water-meth nozzle. Constructed out of 100% methanol resistant stainless steel/zinc plating, the patented Hyper-Sonic design spins the fluid to supersonic levels before forcing it through two venturi shaped orifices to create the Hyper-Sonic micron droplet mist that has become the industry leader in water-methanol technology. Complete with a 80 micron filter, our water injection nozzle can be cleaned and re-used on any application. To unlock power hidden within your water-methanol injection system replace your nozzles with Hyper-Sonic nozzles today. The Boost Cooler Hyper-Sonic-nozzles offer up to 20µ fine atomised mist. - It's the last water-methanol injection nozzle you will ever need to buy. The key to water injection is how fine the fluid droplets are upon injection. The smaller the droplets, the more total surface area per volume injected which results in more heat reduction = more power. Because of this fact, more cooling can be done with less fluid. More of the intake charge can be filled with cold O2 - not water. Product Features: 2-chamber nozzle, Venturi-Design Nominal Flow Rate: ~ 630ml/min / 10.0 GPH Material: Stainless steel with zinc plating 80µ (micron) fine mesh filter Outer Thread: 1/8"NPT27 100% Methanol resistant

Информация:

Boost Cooler Hyper-Sonic Injector, 750ml/min@100psi, including fine mesh filter.

Допълнителна информация:

Flow Rate 750ml/min (12.0 GPH) @ 100psi The SNOW Performance Hyper-Sonic Water-Methanol Injection Nozzle is the worlds best selling and most advanced water-meth nozzle. Constructed out of 100% methanol resistant stainless steel/zinc plating, the patented Hyper-Sonic design spins the fluid to supersonic levels before forcing it through two venturi shaped orifices to create the Hyper-Sonic micron droplet mist that has become the industry leader in water-methanol technology. Complete with a 80 micron filter, our water injection nozzle can be cleaned and re-used on any application. To unlock power hidden within your water-methanol injection system replace your nozzles with Hyper-Sonic nozzles today. The Boost Cooler Hyper-Sonic-nozzles offer up to 20µ fine atomised mist. - It's the last water-methanol injection nozzle you will ever need to buy. The key to water injection is how fine the fluid droplets are upon injection. The smaller the droplets, the more total surface area per volume injected which results in more heat reduction = more power. Because of this fact, more cooling can be done with less fluid. More of the intake charge can be filled with cold O2 - not water. Product Features: 2-chamber nozzle, Venturi-Design Nominal Flow Rate: ~ 750ml/min / 12.0 GPH Material: Stainless steel with zinc plating 80µ (micron) fine mesh filter Outer Thread: 1/8"NPT27 100% Methanol resistant

Информация:

Boost Cooler Hyper-Sonic Injector, 1000ml/min@100psi, including fine mesh filter.

Допълнителна информация:

Flow Rate 1000ml/min (16.0 GPH) @ 100psi The SNOW Performance Hyper-Sonic Water-Methanol Injection Nozzle is the worlds best selling and most advanced water-meth nozzle. Constructed out of 100% methanol resistant stainless steel/zinc plating, the patented Hyper-Sonic design spins the fluid to supersonic levels before forcing it through two venturi shaped orifices to create the Hyper-Sonic micron droplet mist that has become the industry leader in water-methanol technology. Complete with a 80 micron filter, our water injection nozzle can be cleaned and re-used on any application. To unlock power hidden within your water-methanol injection system replace your nozzles with Hyper-Sonic nozzles today. The Boost Cooler Hyper-Sonic-nozzles offer up to 20µ fine atomised mist. - It's the last water-methanol injection nozzle you will ever need to buy. The key to water injection is how fine the fluid droplets are upon injection. The smaller the droplets, the more total surface area per volume injected which results in more heat reduction = more power. Because of this fact, more cooling can be done with less fluid. More of the intake charge can be filled with cold O2 - not water. Product Features: 2-chamber nozzle, Venturi-Design Nominal Flow Rate: ~ 1000ml/min / 16.0 GPH Material: Stainless steel with zinc plating 80µ (micron) fine mesh filter Outer Thread: 1/8"NPT27 100% Methanol resistant

Информация:

For all 1/4" Boost Cooler and compatible systems.

Допълнителна информация:

Safety Upgrade to any Water Methanol Injection System. The high flow inline water methanol check valves from SNOW Performance offer superior safety and flow compared to other water methanol check valves on the market. Custom made with 100% methanol resistant stainless steel spring and EPDM seals ensuring zero corrosion even with high concentrations of methanol. Features: Keeps the water or water-alcohol mixture in the pressure line for instantaneous injection. Prevents the liquid from being pushed back into the reservoir when the system is not actively injecting. For all water injection nozzle holders without an integrated check valve. Redundant protection (motor protection) with a solenoid valve already installed (item no. (Art.No. SP30105). Product Features and Scope of Delivery: 1x Reverse Check Valve with 2x 1/8"-NPT Ports (Inlet/Outlet) Hard Anodized Black 100% Methanol resistance thanks to EPDM Seals and stainless Steel Spring 0.48 bar/7 PSI Crack Pressure 2x 1/8"-NPT male Fitting with 1/4" Connection, Straight Design The Push-In Locking Nuts can be tightened both manually and with a Spanner. Suitable for all 1/4" Water-Methanol Injection Pressure Lines Material: Brass Nickel plated

Информация:

For all Boost Cooler Water Methanol Injection kits of the ProLine Series.

Допълнително информация:

Safety Upgrade to any Water Methanol Injection System of the ProLine Series. The high flow inline water methanol check valves from SNOW Performance offer superior safety and flow compared to other water methanol check valves on the market. Custom made with 100% methanol resistant stainless steel spring and EPDM seals ensuring zero corrosion even with high concentrations of methanol. Features: Keeps the water or water-alcohol mixture in the pressure line for instantaneous injection. Prevents the liquid from being pushed back into the reservoir when the system is not actively injecting. For all water injection nozzle holders without an integrated check valve. Redundant protection (motor protection) with a solenoid valve already installed (item no. (Art.No. SP30105PRO). Also enables subsequent upgrade of existing water meth systems to ProLine Product Features and Scope of Delivery: 1x Reverse Check Valve with 2x 1/8"-NPT Ports (Inlet/Outlet) Hard Anodized Black 100% Methanol resistance thanks to EPDM Seals and stainless Steel Spring 0.48 bar/7 PSI Crack Pressure 2x 1/8"-NPT male Fitting with Dash 4 (4AN) connection Suitable for Boost Cooler ProLine steel braided lines Material: High performance lightweight 6061-T6 CNC machined aluminum Surface treatment: Black anodized finish for durability and strength

Информация:

The DNU allows an additional Boost Cooler Nozzle to be mounted in any of our Water Methanol Injection kits.

Допълнителна информация:

Install an additional nozzle in your Boost Cooler Water Methanol Injection system. The SNOW Performance Dual Nozzle Upgrade enables another Boost Cooler injector to be used in parallel. For example, with a V-engine, 1 nozzle can be installed per pressure pipe. The upgrade also enables a sufficient injection quantity for engines with very high fluid requirements (trucks, CHP units, turbines). Recommended for: Bi-Turbo engines (e.g. Audi S4/RS4, Porsche) Engines with 2 separate throttle valves (e.g. V8) Powerful engines (> 500 hp), where one nozzle alone is not sufficient. 2-nozzle installation for combined charge air and combustion chamber cooling (one Boost Cooler nozzle directly downstream of IC-output, another one right in front of the throttle valve resp. intake manifold). Scope of Delivery: Nozzle Holder, 90° low profile with 1/4" Rapid push-on fitting T-Connector with EPDM-sealings and 1/4" Rapid push-on fittings High pressure 1/4" water injection hose (Nylon)

Информация:

The DNU ProLine allows an additional Boost Cooler Nozzle to be mounted in any of our Water Methanol Injection kits.

Допълнителна информация:

Install an additional nozzle in your Boost Cooler Water Methanol Injection ProLine system. The SNOW Performance Dual Nozzle ProLine Upgrade enables another Boost Cooler injector to be used in parallel. For example, with a V-engine, 1 nozzle can be installed per pressure pipe. The upgrade also enables a sufficient water methnaol injection quantity for engines with very high fluid requirements (trucks, CHP units, turbines). The ProLine Dual nozzle upgrade can also be retrofitted into existing Boost Cooler water methanol injection systems with 1/4" Nylon / FEP lines. Recommended for: Bi-Turbo engines (e.g. Audi S4/RS4, Porsche) Engines with 2 separate throttle valves (e.g. V8) Powerful engines (> 500 hp), where one nozzle alone is not sufficient. 2-nozzle installation for combined charge air and combustion chamber cooling (one Boost Cooler nozzle directly downstream of IC-output, another one right in front of the throttle valve resp. intake manifold). Scope of Delivery: 1x Nozzle Holder 90° low profile, aluminium, hard anodized 1x 1/8"-Dash 4 fitting, aluminium, hard anodized 1x T-Fitting, aluminium with Dash 4 male fittings Material: High performance lightweight 6061-T6 CNC machined aluminum Surface treatment: Black anodized finish for durability and strength 2x 30cm stainless steel braided line with Dash 4 female fittings

Информация:

The DNU ProLine allows an additional Boost Cooler Nozzle to be mounted in any of our Water Methanol Injection kits.

Допълнителна информация:

Maximum cooling performance and optimized distribution with four precision injection points The Snow Performance Quad Nozzle Upgrade is the perfect expansion for Boost Cooler water-methanol injection systems where maximum intake air cooling, equal distribution, and high-output performance are required. Designed for builds with limited space or where a traditional intercooler setup is not used. Four precisely placed nozzles ensure consistent atomization – ideal for high-horsepower engines, motorsport applications, and demanding setups. This upgrade includes four stainless steel braided lines and CNC-machined aluminum fittings and is fully compatible with all existing ProLine systems. Designed to connect with Boost Cooler Hypersonic nozzles (sold separately). Highly recommended in combination with: Boost Cooler V-Band Injection Ring (Part No. SP30130) Boost Cooler Injection Ring with 1/8" Fitting (Part No. SP30114) Boost Cooler Silicone Adapter with 4 Nozzle Ports (Part No. SP31141) Ideal for high-boost or high-power applications Effectively lowers intake air temperatures Precise multi-point injection for optimized atomization Compatible with all Boost Cooler ProLine systems Recommended for: Engines with high cooling requirements Applications requiring optimized liquid distribution Vehicles without an intercooler or with tight intake routing Motorsport builds with focus on octane boost and knock control Kit contents: 4x stainless steel braided lines with Dash 4 fittings 4x straight nozzle holders, black anodized aluminum 3x T-fittings, anodized aluminum, Dash 4 Full set of Dash 4 fittings and connectors Material: CNC-machined 6061-T6 aluminum Black anodized finish – robust, pressure- and heat-resistant