Blow off клапан BMW
-
BMW 135/335/535 Pop Off Ventil Kit Biturbo from Forge.
Made from billet aluminium, Forge Motorsport recirculating diverter valves dump the charge-air back into the air intake system keeping external noise to a minimum.
This increases both quicker throttle response and higher clamping load to maintain boost pressure more reliably.Manufacturer
Information about the manufacturer
Forge Motorsport
Forge Motorsport
Unit 1A, Ashville Trading Estate, Gloucester, GL2 5EU. Larchtower, United Kingdom
https://www.forgemotorsport.co.uk/Contact.html
EU responsible person
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
-
\"This valve is for BMW Mini 1.6 Turbo engines, as found in the BMW Mini Cooper S Turbo R56/57/58 models and Clubman R55, that have the electronically controlled bypass valves.
The valve is also for Peugeot 207/307/308 GT Turbo
It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred.\"Manufacturer
Information about the manufacturer
Forge Motorsport
Forge Motorsport
Unit 1A, Ashville Trading Estate, Gloucester, GL2 5EU. Larchtower, United Kingdom
https://www.forgemotorsport.co.uk/Contact.html
EU responsible person
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
-
This Blow Off, or Dump valve, is for the BMW N20 2.0 Turbo engines that have the electronically controlled bypass valve. This engine can be found in the F10,F20 and F30 chassis badged as 125i,225i, 220i, 228i, 320i, 328i, 520i and 528i. It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred, where the original rubber diaphragm splits, which causes a loss of boost pressure.
Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this.
Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM CU control over valve actuation.Manufacturer
Information about the manufacturer
Forge Motorsport
Forge Motorsport
Unit 1A, Ashville Trading Estate, Gloucester, GL2 5EU. Larchtower, United Kingdom
https://www.forgemotorsport.co.uk/Contact.html
EU responsible person
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
-
This Blow Off, or Dump valve, is for the BMW N20 2.0 Turbo engines that have the electronically controlled bypass valve. This engine can be found in the F10,F20 and F30 chassis badged as 125i,225i, 220i, 228i, 320i, 328i, 520i and 528i. It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred, where the original rubber diaphragm splits, which causes a loss of boost pressure. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this.
Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation.Manufacturer
Information about the manufacturer
Forge Motorsport
Forge Motorsport
Unit 1A, Ashville Trading Estate, Gloucester, GL2 5EU. Larchtower, United Kingdom
https://www.forgemotorsport.co.uk/Contact.html
EU responsible person
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
-
\"Blow Off Valve Kit from FORGE for BMW Mini Cooper S Turbo R56/57/58, Peugeot 207 GT Turbo and 307 GT Turbo.
It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred.\"Manufacturer
Information about the manufacturer
Forge Motorsport
Forge Motorsport
Unit 1A, Ashville Trading Estate, Gloucester, GL2 5EU. Larchtower, United Kingdom
https://www.forgemotorsport.co.uk/Contact.html
EU responsible person
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
-
The multi-award-winning, improved blow-off valves in the Kompact EM series are the world\'s first plug & play solution for the factory-fitted blow off valve. Simply plug and play to replace the OEM valve. No adapters, hoses or additional installation parts are required.
The Kompact EM valve series from Turbosmart utilises motorsport proven billet valve technology and adds an integrated, proprietary solenoid system and internal pressure control channels for a simple plug and play valve with full OE integration and control.
Available as an open blow off version or closed/recirculating.
Features:
- Boost balance valve technology
- Patented integrated pressure control
- True plug & play upgrade
- Integrated, proprietary high-temperature solenoid valve
- Billet construction with high temperature O-rings
Manufacturer
Information about the manufacturer
Turbosmart
Turbosmart UK Ltd
Unit 4, Wharton Street Industrial Estate, Nechells, Birmingham, B75TR, United Kingdom
EU responsible person
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
-
още
Plug & Play electronic recirculation valve for BMW vehicles. (See vehicle list!)
Fast, high-pressure resistant valve for upgrade and motorsport turbochargers .The valve can be replaced directly with the original valve without causing error codes on the control unit. The patented BOV is over 400% tighter than the original valve and thus enables an increase in performance.
Features:
- 100% Plug & Play
- 57 times faster than the original valve
- Over 400% tighter sealing than the original valve
- Billet design
- High temperature resistant
- Available as recirculation or dual valve
Scope of delivery:
- Turbosmart EM series recirculation (plumb back) version
- 3 X fixing screw
- Turbosmart sticker
Manufacturer
Information about the manufacturer
Turbosmart
Turbosmart UK Ltd
Unit 4, Wharton Street Industrial Estate, Nechells, Birmingham, B75TR, United Kingdom
EU responsible person
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
-
Plug & Play electronic recirculation valve suitable for BMW vehicles. (See vehicle list!)
Fast, high-pressure resistant valve for upgrade and motorsport turbochargers .The valve can be replaced directly with the original valve without causing error codes on the control unit. The patented BOV is over 400% tighter than the original valve and thus enables an increase in performance.
Features:
- 100% Plug & Play
- 57 times faster than the original valve
- Over 400% tighter sealing than the original valve
- Billet design
- High temperature resistant
- Available as recirculation or dual valve
Scope of delivery:
- Turbosmart EM series recirculation (plumb back) version
- 3 X fixing screw
- Turbosmart sticker
Manufacturer
Information about the manufacturer
Turbosmart
Turbosmart UK Ltd
Unit 4, Wharton Street Industrial Estate, Nechells, Birmingham, B75TR, United Kingdom
EU responsible person
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
-
Plug & Play electronic blow-off valve suitable for BMW vehicles. (See vehicle list!)
Fast, high-pressure resistant valve for upgrade and motorsport turbochargers .The valve can be replaced directly with the original valve without causing error codes on the control unit. The patented BOV is over 400% tighter than the original valve and thus enables an increase in performance.
Features:
- 100% Plug & Play
- 57 times faster than the original valve
- Over 400% tighter sealing than the original valve
- Billet design
- High temperature resistant
- Available as recirculation or dual valve
Scope of delivery:
- Turbosmart EM Series BOV Dual version
- 3 X fixing screw
- Turbosmart sticker
Manufacturer
Information about the manufacturer
Turbosmart
Turbosmart UK Ltd
Unit 4, Wharton Street Industrial Estate, Nechells, Birmingham, B75TR, United Kingdom
EU responsible person
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
-
The Kompact series from Turbosmart is a high-performance upgrade for the factory-fitted plastic changeover and bypass valves. The Kompact range replaces the plastic and rubber system with a motorsport proven billet aluminium valve.
Turbosmart\'s Kompact range is a direct replacement for your factory valve and offers immediate improvements in performance and throttle response as well as unrivalled reliability over the lifetime of stock, lightly tuned or heavily upgraded engines.
The boost balance system from Turbosmart means that the more boost pressure you feed these valves, the better they seal - it\'s that simple! Billet aluminium construction offers reliability and unrivalled responsiveness is achieved by our 28mm actuators with positive sealing piston.
The Kompact BMW kit is a high performance replacement for the factory plastic bypass valves that offers incredible boost response and no leaks, including 2 valves and silicone hoses for remote installation.
Features:
- Boost balance valve technology
- 28 mm high permeability piston with positive seal
- Direct replacement for OEM units
- Billet construction with high temperature resistant O-rings
- Suitable for plumback or dual port options
Manufacturer
Information about the manufacturer
Turbosmart
Turbosmart UK Ltd
Unit 4, Wharton Street Industrial Estate, Nechells, Birmingham, B75TR, United Kingdom
EU responsible person
BAR-TEK Motorsport GmbH
Im Rauschen Auel 3, 51491 Overath-Brombach, Germany
Топ производители
