ARP болтове и шпилки Audi 1.8T 20V

Single nut for 1.8T 20V cylinder headstud bolt from ARP. Should you ever lose or damage one, no problem. 

• 100% reusable
• Stainless
• Extremely temperature resistant

Price for one nut with washer

Manufacturer

Information about the manufacturer

ARP

Automotive Racing Products, Inc.

1863 Eastman Avenue, Ventura, CA 93003, United States

https://arp-bolts.com/p/contact.php

EU responsible person

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3, 51491 Overath-Brombach, Germany

[email protected]

M8 stud bolt for all 1.8T and many VW Cylinderheads made by ARP.

This studs are failing very often during dismounting of the exhaust manifold. (Stud is mounted in the head)

ARP has developed a special alloy for this application.

Further advantages of these ARP studs:

• 100% reusable
• extrem heat resistant
• keeps manifold seal
• non rusting

Price only for one stud together with nut and washer as shown on picture.
Per Cylinderhaed 13 studs are needed on the 1.8T 20V engine.

Manufacturer

Information about the manufacturer

ARP

Automotive Racing Products, Inc.

1863 Eastman Avenue, Ventura, CA 93003, United States

https://arp-bolts.com/p/contact.php

EU responsible person

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3, 51491 Overath-Brombach, Germany

[email protected]

ARP Camshaft Bolt Kit for 1.8T 20V engines.

The OEM bolts have to be replaced each time they are removed.

This kit includes all of the bolts and washers needed to replace the OEM bolts that secure the cam tray to the cylinder head. By replacing these bolts with stronger ARP units, you can ensure that your cams will stay put even in the most extreme applications. These bolts are made from the ultra strong ARP 8740 alloy, with rolled threads. Another great feature is the fact that these can be reused as many times as needed- the factory units are stretch bolts and must be replaced every time they are removed.

Features:
Includes 36 bolts
Made in the USA by ARP
Fully Reusable

Picture show mounting example. Delivered will be 36pcs ARP bolts for 1.8T 20V engines.

Torque 15 Nm with ARP lubricant.

Manufacturer

Information about the manufacturer

ARP

Automotive Racing Products, Inc.

1863 Eastman Avenue, Ventura, CA 93003, United States

https://arp-bolts.com/p/contact.php

EU responsible person

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3, 51491 Overath-Brombach, Germany

[email protected]

ARP manufactures replacement rod bolts for many popular import and domestic Sport Compact engines that are made of premium grade 8740 chrome moly steel and heat treated to a nominal tensile strength of 200,000 psi.

We recommend to change also conrod bearings.

(Price for complete kit)

Manufacturer

Information about the manufacturer

ARP

Automotive Racing Products, Inc.

1863 Eastman Avenue, Ventura, CA 93003, United States

https://arp-bolts.com/p/contact.php

EU responsible person

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3, 51491 Overath-Brombach, Germany

[email protected]

This head stud kit is a must for the 1.8T 20v running high boost!

Made from a range of high quality chrome molly alloy materials. These fasteners will provide the strength and durability required by today\'s high performance engines.

Packaged in sets containing all required components and mounting instructions.

This kit requieres our special tool.

Tightening torque in 3 steps as usual. Last stel 80 ft/lbs (110 Nm)

Manufacturer

Information about the manufacturer

ARP

Automotive Racing Products, Inc.

1863 Eastman Avenue, Ventura, CA 93003, United States

https://arp-bolts.com/p/contact.php

EU responsible person

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3, 51491 Overath-Brombach, Germany

[email protected]

Complete kit for all 1.8T blocks such as e. g. Golf 4 or Audi TT:

A MUST for all engines that run with increased boost pressure!
ARP is the market leader in this field.
The stud bolt are made of 8740 chromoly steel and have rounded threads.
Up to 30% stronger than stock studs.

All ARP high performance stud kits include a bag of moly paste.

Tightening torque 81Nm.

Manufacturer

Information about the manufacturer

ARP

Automotive Racing Products, Inc.

1863 Eastman Avenue, Ventura, CA 93003, United States

https://arp-bolts.com/p/contact.php

EU responsible person

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3, 51491 Overath-Brombach, Germany

[email protected]

1.8T ARP Motor Kits available in various designs.

For engines with high performance, we recommend the use of high quality bolts or studs.
Especially recommended for tuned engines with increased boost pressure.

The following kits are available:

06A 1.8T BASIC
ARP cylinder head bolts (Torque in 3 Steps, last Step 110 Nm)
ARP crank bolt (Torque 90 Nm + 90°)
ARP camshaft bolt (Torque 65 Nm)

06A 1.8T BASIC PLUS
ARP cylinder head studs (Torque in 3 Steps, last Step 110 Nm)
Crankshaft ARP studs (Torque 81 Nm)
ARP crankshaft pulley bolt (Torque 90 Nm + 90°)
ARP camshaft pulley bolt (Torque 65 Nm)

06A 1.8T Ultimate
ARP cylinder head studs (Torque in 3 Steps, last Step 110 Nm)
Crankshaft ARP studs (Torque 81 Nm)
ARP crankshaft pulley bolt (Torque 90 Nm + 90°)
ARP camshaft pulley bolt (Torque 65 Nm)
ARP flywheel bolts (Torque 95 Nm)
Friction disc for crankshaft flywheel
Friction disc camshaft to camshaft sprocket

Manufacturer

Information about the manufacturer

ARP

Automotive Racing Products, Inc.

1863 Eastman Avenue, Ventura, CA 93003, United States

https://arp-bolts.com/p/contact.php

EU responsible person

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3, 51491 Overath-Brombach, Germany

[email protected]

ARP stud bolt cylinder head Kit for all 1.8T 20V.

A MUST for all engines that run with increased boost pressure! ARP is the market leader in this field.

• The stud bolt are made from 8740 chromoly steel and have rounded threads.
• Up to 30% stronger than stock studs.
• All ARP high-performance bolt kits include a bag of moly paste.

Attention: From model year 1998 upwards, the diameter of the head bolts has been changed from 11mm to 10mm.

Please note the version (engine code).

A special tool is required for this kit!

Torque in 3 stages with sufficient ARP paste. Last stage 110 Nm.

Manufacturer

Information about the manufacturer

ARP

Automotive Racing Products, Inc.

1863 Eastman Avenue, Ventura, CA 93003, United States

https://arp-bolts.com/p/contact.php

EU responsible person

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3, 51491 Overath-Brombach, Germany

[email protected]

Low Boost Kit for all 1.8T 20V engines.

A MUST for all engines that drive with increased boost pressure!

Cap screws:

These reinforced cap screws are made of 8740 chromoly steel and have rounded threads.
Up to 30% stronger stretch steel than standard bolts.
Tightening torque with ARP paste in 3 stages as usual. Last stage 110 Nm.

Head gasket(1,42mm):

These head gaskets are used particularly in high-performance engines in Formula and Rally Sport.
The special composition of different metal layers not only achieves a far better thermal conductivity, but also the pressure stability is increased enormously!

These head gaskets are used for both naturally aspirated and turbo motors in motorsport.

Our special tool is required for this kit.

Here is our video for assembling the cylinder head:

High Boost Kit for all 1.8T 20V engines.

A MUST for all engines that drive with increased boost pressure! This kit belongs to an output of approx. 300 HP

Head Bolts:

These reinforced cap bolts are made of 8740 chromoly steel and have rounded threads.
Up to 30% stronger stretch steel than standard bolts.
Tightening torque with ARP paste in 3 stages as usual. Last stage 110 Nm.

Head gasket(1,68mm):

These head gaskets are used particularly in high-performance engines in Formula and Rally Sport.
The special composition of different metal layers not only achieves a far better thermal conductivity, but also the pressure stability is increased enormously!

These head gaskets are used for both naturally aspirated and turbo motors in motorsport.

Our special tool is required for this kit.

Here is our video for assembling the cylinder head:

1.8T ARP Motor Kits available in various designs.

For engines with high performance, we recommend the use of high quality bolts or studs.
Especially recommended for tuned engines with increased boost pressure.

The following kits are available:

06A 1.8T BASIC
ARP cylinder head bolts (Torque in 3 Steps, last Step 110 Nm)
ARP crank bolt (Torque 90 Nm + 90°)
ARP camshaft bolt (Torque 65 Nm)

06A 1.8T BASIC PLUS
ARP cylinder head studs (Torque in 3 Steps, last Step 110 Nm)
Crankshaft ARP studs (Torque 81 Nm)
ARP crankshaft pulley bolt (Torque 90 Nm + 90°)
ARP camshaft pulley bolt (Torque 65 Nm)

06A 1.8T Ultimate
ARP cylinder head studs (Torque in 3 Steps, last Step 110 Nm)
Crankshaft ARP studs (Torque 81 Nm)
ARP crankshaft pulley bolt (Torque 90 Nm + 90°)
ARP camshaft pulley bolt (Torque 65 Nm)
ARP flywheel bolts (Torque 95 Nm)
Friction disc for crankshaft flywheel
Friction disc camshaft to camshaft sprocket

Manufacturer

Information about the manufacturer

ARP

Automotive Racing Products, Inc.

1863 Eastman Avenue, Ventura, CA 93003, United States

https://arp-bolts.com/p/contact.php

EU responsible person

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3, 51491 Overath-Brombach, Germany

[email protected]

1.8T ARP Motor Kits available in various designs.

For engines with high performance, we recommend the use of high quality bolts or studs.
Especially recommended for tuned engines with increased boost pressure.

The following kits are available:

06A 1.8T BASIC
ARP cylinder head bolts (Torque in 3 Steps, last Step 110 Nm)
ARP crank bolt (Torque 90 Nm + 90°)
ARP camshaft bolt (Torque 65 Nm)

06A 1.8T BASIC PLUS
ARP cylinder head studs (Torque in 3 Steps, last Step 110 Nm)
Crankshaft ARP studs (Torque 81 Nm)
ARP crankshaft pulley bolt (Torque 90 Nm + 90°)
ARP camshaft pulley bolt (Torque 65 Nm)

06A 1.8T Ultimate
ARP cylinder head studs (Torque in 3 Steps, last Step 110 Nm)
Crankshaft ARP studs (Torque 81 Nm)
ARP crankshaft pulley bolt (Torque 90 Nm + 90°)
ARP camshaft pulley bolt (Torque 65 Nm)
ARP flywheel bolts (Torque 95 Nm)
Friction disc for crankshaft flywheel
Friction disc camshaft to camshaft sprocket

Manufacturer

Information about the manufacturer

ARP

Automotive Racing Products, Inc.

1863 Eastman Avenue, Ventura, CA 93003, United States

https://arp-bolts.com/p/contact.php

EU responsible person

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3, 51491 Overath-Brombach, Germany

[email protected]

Extra long bolts with washers for mounting a KKK turbocharger with our upgrade exhaust manifold.

Now also made of extremely heat-resistant INCONEL® material!
INCONEL® is a special alloy which is e.g. is also used in Formula 1 or for the construction of reactor housings.

Since the upgrade manifold is higher than the standard, these extra long screws must be used.

Mount screws on the thread and under the head with VW hot screw paste.

Tightening torque 55Nm.

After the first installation, let the engine warm up and retighten the screws with a cooled manifold with 55Nm!

Always use new gasket between turbo and manifold.

(INCONEL® is a registered name of Special Metals Corp.)

Length Under the head: 75.00 mm

Please select for our upgrade manifold for transverse or longitudinal engines.

Manufacturer

Information about the manufacturer

BAR-TEK®

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3, 51491 Overath-Brombach, Germany

[email protected]

High Boost ARP Studs Cylinder Head Kit for all 1.8T 20V.

A MUST for all engines that drive with increased boost pressure!
ARP is the market leader in this field.
The studs are made of 8740 chromoly steel and have rounded threads.
Up to 30% stronger stretch steel than standard bolts.

All ARP high performance bolt kits incl. bag Moly Paste.

Attention: HIGH BOOST Version for maximum boost and pressure. The thread in the block has to be cut from 10mm to 11mm. Then these studs are 11mm in diameter and can withstand higher forces.

Please note the version (engine code).

Don\'t fit to AEB engines

Torque in 3 stages with sufficient ARP paste. Last stage 110 Nm.

Manufacturer

Information about the manufacturer

BAR-TEK®

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3, 51491 Overath-Brombach, Germany

[email protected]

Locking plate for the manifold bolts on all 1.8T engines with K03 and K04 turbochargers.

Loose manifold bolts at 1.8T are not uncommon. With this lock washer the problem is solved. By tabs, which are bent up at the screw head to secure, the screws can no longer loosen.

Does not fit the S3 K04 manifold.

In addition, we recommend our INCONEL screws.

Manufacturer

Information about the manufacturer

IE - Integrated Engineering

Integrated Engineering

2859 S 1030 W Suite 1 Salt Lake City, UT 84119, United States

[email protected]

EU responsible person

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3, 51491 Overath-Brombach, Germany

[email protected]